geoprimsField-grade geospatial math

Air base and base-to-height ratio

The distance between exposures for an end lap, the base-to-height ratio it gives, and the vertical precision one parallax measurement implies; why more overlap means weaker heights from each pair.

Planning and education aid. Not for primary navigation. Full disclaimer

Experimental: not yet fully verified. How results are checked

853.44m

Photos 853.44 m apart give a base-to-height ratio of 0.28; more end lap shortens the base and weakens the heights from each pair.

Base-to-height ratio
Ground coverage along track
Vertical precision
Provenance
Computed by
drone.photogrammetry.stereo-base 1.0.0, core 0.1.0
Model
G = d H / f (EM 1110-1-1000 eq. 10-9 with S = f / H); B = G (1 − E/100) (eq. 10-11); σ_h = (H / B)(H / f) σ_p, derived from h = H − f B / p (eq. 10-14)
Accuracy
Exact for vertical photos over flat ground; σ_h is the geometric precision of one parallax measurement, not the accuracy of a mapping product
Notes
1 shown with the answer
Cites
U.S. Army Corps of Engineers, EM 1110-1-1000, Photogrammetric Mapping; Abdullah, Q., Penn State College of Earth and Mineral Sciences, GEOG 892: Geospatial Applications of Unmanned Aerial Systems

Something look off?

Your values

Showing an example. Change anything.
More options 1
Camera profiles

Loading…

Run many at once from a CSV

Loading…

Air base 853.44 m, B/H 0.28seen by both photosOne parallax reading: ±54.4 cm in height
How we got thisFormula, worked example, sources, and proof

Model: G = d H / f (EM 1110-1-1000 eq. 10-9 with S = f / H); B = G (1 − E/100) (eq. 10-11); σ_h = (H / B)(H / f) σ_p, derived from h = H − f B / p (eq. 10-14)

Accuracy: Exact for vertical photos over flat ground; σ_h is the geometric precision of one parallax measurement, not the accuracy of a mapping product

When to use this: Use this to see what an end lap does to a stereo pair: the air base between exposures, the base-to-height ratio, and how precisely one parallax measurement fixes a height. It shows why mapping flights with very high overlap get weaker height geometry from each pair, even though the extra photos help in other ways.

Limitations: The vertical precision is the geometric precision of one parallax measurement in one stereo pair, derived from the parallax equation; it is not the accuracy of a finished map or model, which ASPRS assesses with checkpoints rather than predicting from geometry. Modern processing combines many overlapping photos, so the pair geometry is only part of the story. Flat ground and vertical photos are assumed.

Worked example: 60% end lap at 10,000 ft with a 100 mm lens and a 70 mm frame. Source: EM 1110-1-1000 eq. 10-9 and 10-11: 7,000 ft coverage, 2,800 ft air base.

You enter

End lap
60
Focal length
100 mm
Frame length along track
70 mm
Height above ground
10000 ft
Parallax precision
0.005 mm

You get

Air base
853.44 m
Base-to-height ratio
0.28
Ground coverage along track
2,133.6 m
Vertical precision
54.4 cm

Review: Not yet independently reviewed by a Part 107 remote pilot.

Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources

Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.