Photo scale and flying height
The scale of a vertical photo from the focal length and flying height, the flying height for a scale or a , and the ground distance a photo distance stands for.
Planning and education aid. Not for primary navigation. Full disclaimer
The photo scale is 1:12,000, flown 1,828.8 m above the ground.
- Scale number
- Height above ground
- Flying height above datum
Provenance
- Computed by
- drone.photogrammetry.photo-scale 1.0.0, core 0.1.0
- Model
- S = f / (H − h) (EM 1110-1-1000 eq. 10-1); D = d (H − h) / f (eq. 10-3); GSD = sensor width × (H − h) / (f × image width), as the GSD tool works it, or pixel pitch × (H − h) / f
- Accuracy
- Exact for a truly vertical photo over ground at the stated elevation; tilt and relief change the scale across the frame
- Notes
- None
- Cites
- U.S. Army Corps of Engineers, EM 1110-1-1000, Photogrammetric Mapping; Abdullah, Q., Penn State College of Earth and Mineral Sciences, GEOG 892: Geospatial Applications of Unmanned Aerial Systems
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: S = f / (H − h) (EM 1110-1-1000 eq. 10-1); D = d (H − h) / f (eq. 10-3); GSD = sensor width × (H − h) / (f × image width), as the GSD tool works it, or pixel pitch × (H − h) / f
Accuracy: Exact for a truly vertical photo over ground at the stated elevation; tilt and relief change the scale across the frame
When to use this: Use this to find the scale of a vertical aerial photo from the camera's focal length and the flying height, or to work back from a wanted scale or GSD to the height to fly. It also turns a distance measured on the photo into the ground distance it stands for, at the photo's scale.
Limitations: The scale holds only at the stated ground elevation of a truly vertical photo. Tilt and terrain relief make it vary across the frame, so a ground distance from one photo distance is approximate where the ground is not flat. Heights are above the datum you choose; give the ground elevation on the same datum.
Worked example: A 6 in film camera at 6,000 ft above the terrain. Source: Penn State GEOG 892, Lesson 4, Scale from Film Camera: 1:12,000. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Focal length
- 6 in
- Flying height
- 6000 ft
You get
- Photo scale
- 1:12,000
- Scale number
- 12,000
- Height above ground
- 1,828.8 m
- Flying height above datum
- 1,828.8 m
Review: Not yet independently reviewed by a Part 107 remote pilot.
Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-11-06, changed: Thirteen tools are now marked stable rather than experimental: cabin altitude, approach category, circling radius, RVR to visibility, fuel density with temperature, climb requirement, hydroplaning speed, supplemental oxygen, time of useful consciousness, parallax height, photo scale, relief displacement, and sidereal time. Nothing they compute changed. Stable means each one now carries what the verification bar asks for: a derivation note with its equations and domain, a worked example taken from a published source rather than from our own arithmetic, an invariants test, at least twenty golden vectors, and a page that says when to reach for the tool and where its answer stops. The pages drop the experimental warning, and the tools join their MCP toolsets, so an agent can call them by name. Changelog
Checked against: 24 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- EM 1110-1-1000, Photogrammetric Mapping, U.S. Army Corps of Engineers, 31 March 1993. Chapter 10, Principles of Photogrammetry, equations 10-1 to 10-15.
- GEOG 892: Geospatial Applications of Unmanned Aerial Systems, Abdullah, Q., Penn State College of Earth and Mineral Sciences, online course text. Lesson 4, Geometry of Vertical Image and Designing a Flight Route. Read free.
Terms
- GSD: ground sampling distance
- The ground width one image pixel covers, such as 2 cm per pixel. A smaller GSD shows more detail. Source: Elements of Photogrammetry with Applications in GIS
GSD — ground sampling distance
The ground width one image pixel covers, such as 2 cm per pixel. A smaller GSD shows more detail.
Source: Elements of Photogrammetry with Applications in GIS
Learn the concept: Why overlap changes heights