Relief displacement and object height
How far a tall object's top shifts from its base on a vertical photo, or the object's height from that shift: d = r h / H, solved for whichever one you leave out.
Planning and education aid. Not for primary navigation. Full disclaimer
The object is 122.7 m tall; its top lies 54.1 mm farther from the photo center than its base.
- Displacement
- Radial distance
- Flying height above datum
- Height above the base
Provenance
- Computed by
- drone.photogrammetry.relief-displacement 1.0.0, core 0.1.0
- Model
- d = r h / (H − h_base), from EM 1110-1-1000 eq. 10-6 and 10-7, solved for whichever of d, r, h, or H is left out
- Accuracy
- Exact for a truly vertical photo; tilt shifts the radial lines, and a 0.1 mm error in d moves the height by about 0.1% per mm of d
- Notes
- None
- Cites
- U.S. Army Corps of Engineers, EM 1110-1-1000, Photogrammetric Mapping
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: d = r h / (H − h_base), from EM 1110-1-1000 eq. 10-6 and 10-7, solved for whichever of d, r, h, or H is left out
Accuracy: Exact for a truly vertical photo; tilt shifts the radial lines, and a 0.1 mm error in d moves the height by about 0.1% per mm of d
When to use this: Use this to measure the height of a tower, building, or tree from one vertical aerial photo: measure how far its top's image sits from its base's image along the line from the photo center, and the distance from the center to the top. It also works the other way, to show how far a tall object will lean on a photo or an orthophoto that was not corrected for it.
Limitations: It assumes a truly vertical photo and an object that stands straight up. Distances on the photo are measured from the principal point (the photo center) to the top's image, along the radial line. A tilted photo moves the radial lines, so the answer is approximate there. The height above the base needs the base's elevation on the same datum as the flying height.
Worked example: A tower 54.1 mm displaced, 121.7 mm from the photo center. Source: Wolf, Dewitt & Wilkinson (2014), example 6-7: about 122.7 m. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Base elevation
- 259 m
- Displacement
- 54.1 mm
- Flying height
- 535 m
- Radial distance
- 121.7 mm
You get
- Object height
- 122.7 m
- Displacement
- 54.1 mm
- Radial distance
- 121.7 mm
- Flying height above datum
- 535 m
- Height above the base
- 276 m
Review: Not yet independently reviewed by a Part 107 remote pilot.
Last verified: 2026-11-07, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-11-06, changed: Thirteen tools are now marked stable rather than experimental: cabin altitude, approach category, circling radius, RVR to visibility, fuel density with temperature, climb requirement, hydroplaning speed, supplemental oxygen, time of useful consciousness, parallax height, photo scale, relief displacement, and sidereal time. Nothing they compute changed. Stable means each one now carries what the verification bar asks for: a derivation note with its equations and domain, a worked example taken from a published source rather than from our own arithmetic, an invariants test, at least twenty golden vectors, and a page that says when to reach for the tool and where its answer stops. The pages drop the experimental warning, and the tools join their MCP toolsets, so an agent can call them by name. Changelog
Checked against: 28 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- EM 1110-1-1000, Photogrammetric Mapping, U.S. Army Corps of Engineers, 31 March 1993. Chapter 10, Principles of Photogrammetry, equations 10-1 to 10-15.