Height from stereo parallax
A point's elevation from its parallax on a stereo pair: from the parallax difference to a control point, or from the absolute parallax with the air base and focal length, with its ground X and Y.
Planning and education aid. Not for primary navigation. Full disclaimer
The point is at elevation 13.29 m.
- Height above the control
- Point parallax
Provenance
- Computed by
- drone.photogrammetry.parallax-height 1.0.0, core 0.1.0
- Model
- h_A = h_C + Δp (H − h_C) / (p_C + Δp) (EM 1110-1-1000 eq. 10-15, with p_A = p_C + Δp); h = H − f B / p, X = x B / p, Y = y B / p (eq. 10-14)
- Accuracy
- Exact for truly vertical photos taken from equal heights; small parallax errors give large height errors in the absolute form, so the difference form near a control point is preferred
- Notes
- None
- Cites
- U.S. Army Corps of Engineers, EM 1110-1-1000, Photogrammetric Mapping
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: h_A = h_C + Δp (H − h_C) / (p_C + Δp) (EM 1110-1-1000 eq. 10-15, with p_A = p_C + Δp); h = H − f B / p, X = x B / p, Y = y B / p (eq. 10-14)
Accuracy: Exact for truly vertical photos taken from equal heights; small parallax errors give large height errors in the absolute form, so the difference form near a control point is preferred
When to use this: Use this to find the height or elevation of a point from a stereo pair of vertical photos: the parallax difference between the point and a nearby control point of known elevation gives the point's elevation, such as the height of a tree whose base is hidden. With the air base and focal length, the absolute parallax gives the elevation and the ground X and Y on its own.
Limitations: Both photos must be truly vertical and taken from the same flying height, with parallax measured along the flight line. Tilt, unequal heights, and lens distortion upset the parallax method, the absolute form most of all. Use control points close to the point, and measure parallax and focal length in the same unit.
Worked example: A tree 1.3 mm of parallax above the ground at 915 m. Source: Wolf, Dewitt & Wilkinson (2014), example 8-3: about 13.3 m. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Control elevation
- 0 m
- Control point parallax
- 88.2 mm
- Flying height
- 915 m
- Parallax difference
- 1.3 mm
You get
- Elevation
- 13.29 m
- Height above the control
- 13.29 m
- Point parallax
- 89.5 mm
Review: Not yet independently reviewed by a Part 107 remote pilot.
Last verified: 2026-11-07, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-11-06, changed: Thirteen tools are now marked stable rather than experimental: cabin altitude, approach category, circling radius, RVR to visibility, fuel density with temperature, climb requirement, hydroplaning speed, supplemental oxygen, time of useful consciousness, parallax height, photo scale, relief displacement, and sidereal time. Nothing they compute changed. Stable means each one now carries what the verification bar asks for: a derivation note with its equations and domain, a worked example taken from a published source rather than from our own arithmetic, an invariants test, at least twenty golden vectors, and a page that says when to reach for the tool and where its answer stops. The pages drop the experimental warning, and the tools join their MCP toolsets, so an agent can call them by name. Changelog
Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- EM 1110-1-1000, Photogrammetric Mapping, U.S. Army Corps of Engineers, 31 March 1993. Chapter 10, Principles of Photogrammetry, equations 10-1 to 10-15.
Learn the concept: Why overlap changes heights