Photo spacing for a front overlap
The ground distance between photo centers along the flight line that gives a chosen front overlap at a height above ground.
Planning and education aid. Not for primary navigation. Full disclaimer
Take a photo every 18 m along the line.
- Footprint along track
Provenance
- Computed by
- drone.photogrammetry.trigger-distance 1.0.0, core 0.1.0
- Model
- Photo spacing B = footprint along track × (1 − front overlap), with footprint = sensor height × height / focal length (Wolf, Dewitt & Wilkinson 2014, ch. 6)
- Accuracy
- Exact for a nadir pinhole camera over flat ground at a steady height
- Notes
- None
- Cites
- Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, Elements of Photogrammetry with Applications in GIS; Pix4D support documentation, Selecting the image acquisition plan type (overlap guidance)
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Photo spacing B = footprint along track × (1 − front overlap), with footprint = sensor height × height / focal length (Wolf, Dewitt & Wilkinson 2014, ch. 6)
Show your work
Footprint along the flight line
what one photo covers in the direction of travelat 90 m above the ground= 90 mDistance between photos
spacing = footprint × (1 − front overlap)90 m × (1 − 80%)= 18 m
The same steps an agent gets from the MCP server with explain: true.
Accuracy: Exact for a nadir pinhole camera over flat ground at a steady height
When to use this: Use this to set a distance-based camera trigger for a mapping flight. Enter the height above ground, the sensor's width and height, the focal length, and the front overlap you want; 75% is used if you leave it out. The tool returns how far apart the photo centers should be on the ground and the length of ground one photo covers along the line.
Limitations: The spacing holds over flat ground at the planned height. Where the ground rises the overlap falls, so check high ground with the terrain overlap tool. The camera is taken to point straight down with its long side across the flight line unless you choose portrait. It does not tell you whether the camera can shoot that fast; the trigger interval tool does.
Worked example: A 1-inch sensor at 90 m with 80% front overlap. Source: Footprint 90 m along track, so 90 × (1 − 0.80) is 18 m between photos. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Focal length
- 8.8 mm
- Front overlap
- 80
- Height above ground
- 90 m
- Sensor height
- 8.8 mm
- Sensor width
- 13.2 mm
You get
- Trigger distance
- 18 m
- Footprint along track
- 90 m
Review: Not yet independently reviewed by a Part 107 remote pilot.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- 35 mm full-frame width used to derive a crop factor
36 mm— Elements of Photogrammetry with Applications in GIS- 35 mm full-frame height used to derive a crop factor
24 mm— Elements of Photogrammetry with Applications in GIS
Sources
- Elements of Photogrammetry with Applications in GIS, Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, 4th edition. Chapter 6 (vertical photographs: scale and ground coverage). Read free.
- Selecting the image acquisition plan type (overlap guidance), Pix4D support documentation, Vendor guidance, not a standard. General case: at least 75% front, 60% side; forest and dense vegetation: at least 85% front and side.
Learn the concept: Why overlap changes heights