geoprimsField-grade geospatial math

Flight line spacing for a side overlap

The distance between adjacent flight lines that gives a chosen side overlap at a height above ground.

Planning and education aid. Not for primary navigation. Full disclaimer

40.5m

Space the flight lines 40.5 m apart.

Footprint across track
Provenance
Computed by
drone.photogrammetry.line-spacing 1.0.0, core 0.1.0
Model
Line spacing W = footprint across track × (1 − side overlap), with footprint = sensor width × height / focal length (Wolf, Dewitt & Wilkinson 2014, ch. 6)
Accuracy
Exact for a nadir pinhole camera over flat ground at a steady height
Notes
None
Cites
Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, Elements of Photogrammetry with Applications in GIS; Pix4D support documentation, Selecting the image acquisition plan type (overlap guidance)

Something look off?

Your values

Showing an example. Change anything.
More options 3
Camera profiles

Loading…

Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Line spacing W = footprint across track × (1 − side overlap), with footprint = sensor width × height / focal length (Wolf, Dewitt & Wilkinson 2014, ch. 6)

Show your work

  1. Footprint across the flight line

    what one photo covers side to side

    at 90 m above the ground = 135 m

  2. Distance between lines

    spacing = footprint × (1 − side overlap)

    135 m × (1 − 70%) = 40.5 m

The same steps an agent gets from the MCP server with explain: true.

Accuracy: Exact for a nadir pinhole camera over flat ground at a steady height

When to use this: Use this to space the lines of a mapping grid. Enter the height above ground, the sensor's width and height, the focal length, and the side overlap you want; 60% is used if you leave it out. The tool returns the distance between neighboring flight lines and the width of ground one photo covers across the line, ready for the survey grid tool.

Limitations: The spacing holds over flat ground at the planned height. Where the ground rises between lines the side overlap falls, so check high ground with the terrain overlap tool. The camera is taken to point straight down with its long side across the flight line unless you choose portrait. Crosswind crab narrows the effective swath a little and is not modeled.

Worked example: A 1-inch sensor at 90 m with 70% side overlap. Source: Footprint 135 m across track, so 135 × (1 − 0.70) is 40.5 m between lines. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Focal length
8.8 mm
Height above ground
90 m
Sensor height
8.8 mm
Sensor width
13.2 mm
Side overlap
70

You get

Line spacing
40.5 m
Footprint across track
135 m

Review: Not yet independently reviewed by a Part 107 remote pilot.

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

35 mm full-frame width used to derive a crop factor
36 mm — Elements of Photogrammetry with Applications in GIS
35 mm full-frame height used to derive a crop factor
24 mm — Elements of Photogrammetry with Applications in GIS

Sources