geoprimsField-grade geospatial math

Camera trigger interval

The time between photos that gives a chosen front overlap at a groundspeed and height, checked against how fast the camera can shoot.

Planning and education aid. Not for primary navigation. Full disclaimer

1.5s

Take a photo every 1.5 s. The camera cannot shoot that fast at this speed.

  • Caution:Photos are needed every 1.5 s, but the camera needs 2 s. Fly at 9 m/s or less.
Trigger distance
Fastest speed for the camera
Provenance
Computed by
drone.photogrammetry.trigger-interval 1.0.0, core 0.1.0
Model
Interval t = B / v, with photo spacing B = footprint along track × (1 − front overlap) and v the groundspeed (Wolf, Dewitt & Wilkinson 2014, ch. 6)
Accuracy
Exact for a nadir pinhole camera over flat ground at a steady height
Notes
1 shown with the answer
Cites
Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, Elements of Photogrammetry with Applications in GIS; Pix4D support documentation, Selecting the image acquisition plan type (overlap guidance)

Something look off?

Your values

Showing an example. Change anything.
More options 5
Camera profiles

Loading…

Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Interval t = B / v, with photo spacing B = footprint along track × (1 − front overlap) and v the groundspeed (Wolf, Dewitt & Wilkinson 2014, ch. 6)

Show your work

  1. Footprint along the flight line

    what one photo covers in the direction of travel

    at 90 m above the ground = 90 m

  2. Distance between photos

    spacing = footprint × (1 − front overlap)

    90 m × (1 − 80%) = 18 m

  3. Trigger interval

    interval=spacing/groundspeed

    18 m / 12 m/s = 1.5 s

The same steps an agent gets from the MCP server with explain: true.

Accuracy: Exact for a nadir pinhole camera over flat ground at a steady height

When to use this: Use this to set a time-based camera trigger, or to find how fast you can fly before the camera falls behind. Enter the height above ground, the sensor size, the focal length, the groundspeed, and the front overlap; 75% is used if you leave it out. Add the fastest interval your camera can hold to get the highest groundspeed that still keeps the overlap, with a warning if the plan is too fast.

Limitations: A time trigger holds the overlap only at the groundspeed entered, so a tailwind leg stretches the spacing and a headwind leg shortens it; plan for the fastest leg or use a distance trigger. The spacing is for flat ground at the planned height. Camera write speed can fall with a full buffer or a slow card, so test the minimum interval rather than trusting the specification.

Worked example: 12 m/s at 90 m with 80% front overlap and a 2 s camera. Source: 18 m between photos at 12 m/s is 1.5 s, faster than a 2 s camera: fly 9 m/s or less. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Focal length
8.8 mm
Front overlap
80
Groundspeed
12 m/s
Height above ground
90 m
Camera minimum interval
2 s
Sensor height
8.8 mm
Sensor width
13.2 mm

You get

Trigger interval
1.5 s
Trigger distance
18 m
Fastest speed for the camera
9 m/s

Review: Not yet independently reviewed by a Part 107 remote pilot.

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 24 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

35 mm full-frame width used to derive a crop factor
36 mm — Elements of Photogrammetry with Applications in GIS
35 mm full-frame height used to derive a crop factor
24 mm — Elements of Photogrammetry with Applications in GIS

Sources