geoprimsField-grade geospatial math

Transit-rule traverse adjustment

Adjusts a closed traverse directly by distributing latitude and departure misclosure in proportion to the corresponding component magnitudes.

Experimental: not yet fully verified. How results are checked

1:7,767

The transit-rule adjustment closes at its start after a misclosure of 0.515 ft over 3,999.9 ft.

Adjusted points
PointNorthingEastingAdjusted bearingAdjusted distance
15,000.000 ft5,000.000 ft
25,706.988 ft5,707.058 ftN 45°00'10" E999.881 ft
34,999.762 ft6,414.116 ftS 44°59'36" E1,000.050 ft
44,292.748 ft5,707.173 ftS 44°59'50" W999.819 ft
55,000.000 ft5,000.000 ftN 44°59'48" W1,000.150 ft
Linear misclosure
Misclosure direction
Σ latitudes
Σ departures
Total length
Precision ratio
Provenance
Computed by
survey.cogo.transit 1.0.0, core 0.1.0
Model
Transit rule: latitude corrections are proportional to |latitude| and departure corrections to |departure|
Accuracy
Exact arithmetic; the adjusted traverse closes to within 1e-9 of the unit
Notes
1 shown with the answer
Cites
Ghilani, C. D., and Wolf, P. R., Pearson, Elementary Surveying: An Introduction to Geomatics

Something look off?

Your values

Showing an example. Change anything.
More options 2
Run many at once from a CSV

Loading…

1234N ↑Precision 1:7,767 · misclosure 0.515 ft before adjustment999.881000.05999.821000.15Misclosure ×500
How we got thisFormula, worked example, sources, and proof

Model: Transit rule: latitude corrections are proportional to |latitude| and departure corrections to |departure|

Show your work

  1. Sum of latitudes

    ΣL = Σ distance × cos(bearing)

    4 courses = 0.477 ft

  2. Sum of departures

    ΣD = Σ distance × sin(bearing)

    4 courses = 0.1942 ft

  3. Error of closure

    e=(ΣL2+ΣD2)

    √(0.477² + 0.1942²) = 0.515 ft

  4. Precision

    precision = perimeter / error of closure

    3,999.9 ft / 0.515 ft = 1:7,767

The same steps an agent gets from the MCP server with explain: true.

Accuracy: Exact arithmetic; the adjusted traverse closes to within 1e-9 of the unit

When to use this: Use the transit rule when the governing survey specification calls for it and angular observations are treated as more precise than distances. The operation reports the same closure evidence as the general traverse tool, fixes the adjustment method so it cannot be selected incorrectly, and carries the adjusted coordinates from the entered starting point.

Limitations: Transit-rule corrections depend on the orientation of the coordinate axes; rotating the same measured traverse changes how its latitude and departure corrections are divided. This is a conventional balance, not a blunder detector or a least-squares adjustment. All courses must already be horizontal plane distances in one unit and directions referenced to one grid or assumed north.

Worked example: Four-course transit adjustment. Source: add-survey-suite transit-rule scenario. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Courses
45, 1000 135, 1000 225, 999.7 315.01, 1000.2

You get

Precision
1:7,767
Linear misclosure
0.515 ft
Misclosure direction
N 22°08'57" E
Σ latitudes
0.477 ft
Σ departures
0.1942 ft
Total length
3,999.9 ft
Precision ratio
7,767
Note
Transit-rule corrections depend on the orientation of the coordinate axes; rotate the grid and the adjustment changes.

Review: Not yet independently reviewed by a licensed surveyor.

Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources

Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.