Crandall-rule traverse adjustment
Adjusts a closed traverse by holding every measured bearing and applying the closure correction through course distances only.
Experimental: not yet fully verified. How results are checked
The Crandall adjustment holds every bearing and closes at its start after a misclosure of 50.832 ft over 735 ft.
| Point | Northing | Easting | Adjusted bearing | Adjusted distance |
|---|---|---|---|---|
| 1 | 5,000.000 ft | 5,000.000 ft | ||
| 2 | 5,128.985 ft | 5,034.561 ft | N 15°00'00" E | 133.535 ft |
| 3 | 5,153.676 ft | 5,126.711 ft | N 75°00'00" E | 95.400 ft |
| 4 | 5,072.889 ft | 5,222.988 ft | S 50°00'00" E | 125.681 ft |
| 5 | 4,921.862 ft | 5,168.019 ft | S 20°00'00" W | 160.721 ft |
| 6 | 4,906.125 ft | 5,078.771 ft | S 80°00'00" W | 90.625 ft |
| 7 | 5,000.000 ft | 5,000.000 ft | N 40°00'00" W | 122.546 ft |
- Linear misclosure
- Misclosure direction
- Σ latitudes
- Σ departures
- Total length
- Precision ratio
Provenance
- Computed by
- survey.cogo.crandall 1.0.0, core 0.1.0
- Model
- Crandall rule: bearings are held and distance corrections are solved by weighted least squares with weights proportional to 1/length
- Accuracy
- Exact arithmetic; the adjusted traverse closes to within 1e-9 of the unit
- Notes
- 1 shown with the answer
- Cites
- Ghilani, C. D., and Wolf, P. R., Pearson, Elementary Surveying: An Introduction to Geomatics
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Crandall rule: bearings are held and distance corrections are solved by weighted least squares with weights proportional to 1/length
Show your work
Sum of latitudes
ΣL = Σ distance × cos(bearing)6 courses= -49.9995 ftSum of departures
ΣD = Σ distance × sin(bearing)6 courses= 9.1645 ftError of closure
√(-49.9995² + 9.1645²)= 50.8324 ftPrecision
precision = perimeter / error of closure735 ft / 50.8324 ft= 1:14
The same steps an agent gets from the MCP server with explain: true.
Accuracy: Exact arithmetic; the adjusted traverse closes to within 1e-9 of the unit
When to use this: Use the Crandall rule when the governing survey specification says to hold the measured bearings and place the entire correction into course distances. The operation reports the unadjusted closure and precision, solves the 2 × 2 distance-correction system, and carries the adjusted coordinates from the entered starting point without exposing an unrelated method selector.
Limitations: The Crandall rule needs courses in at least 2 directions; a traverse along one line is degenerate. It assumes the bearings should be held and does not identify blunders or replace a full network least-squares adjustment. Distances must already be horizontal plane values in one unit, and all bearings must use the same grid or assumed north reference.
Worked example: Six-course bearing-held adjustment. Source: add-survey-suite Crandall-rule requirement. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Courses
- 15, 120 75, 95 130, 140 200, 180 260, 90 320, 110
You get
- Precision
- 1:14
- Linear misclosure
- 50.832 ft
- Misclosure direction
- S 10°23'12" E
- Σ latitudes
- -49.9995 ft
- Σ departures
- 9.1645 ft
- Total length
- 735 ft
- Precision ratio
- 14
- Note
- The Crandall rule holds every bearing as measured and puts the whole correction into the distances.
Review: Not yet independently reviewed by a licensed surveyor.
Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 24 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Elementary Surveying: An Introduction to Geomatics, Ghilani, C. D., and Wolf, P. R., Pearson, 16th edition. Chapters 10 (traverse computations), 12 (area), 24 (horizontal curves), 25 (vertical curves), 26 (volumes).
Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.