geoprimsField-grade geospatial math

Bowditch traverse adjustment

Adjusts a closed traverse by distributing latitude and departure misclosure in proportion to each course length.

1:5,175

The Bowditch-adjusted traverse closes at its start after a misclosure of 0.182 ft over 939.46 ft.

Adjusted points
PointNorthingEastingAdjusted bearingAdjusted distance
10.000 ft0.000 ft
2-188.388 ft-20.601 ftS 6°14'26" W189.511 ft
3-340.641 ft66.047 ftS 29°38'40" E175.182 ft
4-310.708 ft-129.423 ftN 81°17'37" W197.749 ft
5-171.627 ft-159.974 ftN 12°23'21" W142.396 ft
60.000 ft0.000 ftN 42°59'14" E234.622 ft
Linear misclosure
Misclosure direction
Σ latitudes
Σ departures
Total length
Precision ratio
Provenance
Computed by
survey.cogo.bowditch 1.0.0, core 0.1.0
Model
Compass (Bowditch) rule: each latitude and departure correction is proportional to course length
Accuracy
Exact arithmetic; the adjusted traverse closes to within 1e-9 of the unit
Notes
None
Cites
Ghilani, C. D., and Wolf, P. R., Pearson, Elementary Surveying: An Introduction to Geomatics

Something look off?

Your values

Showing an example. Change anything.
More options 2
Run many at once from a CSV

Loading…

12345N ↑Precision 1:5,175 · misclosure 0.182 ft before adjustment175.18197.75142.4Misclosure ×500
How we got thisFormula, worked example, sources, and proof

Model: Compass (Bowditch) rule: each latitude and departure correction is proportional to course length

Show your work

  1. Sum of latitudes

    ΣL = Σ distance × cos(bearing)

    5 courses = -0.079 ft

  2. Sum of departures

    ΣD = Σ distance × sin(bearing)

    5 courses = -0.1634 ft

  3. Error of closure

    e=(ΣL2+ΣD2)

    √(-0.079² + -0.1634²) = 0.1815 ft

  4. Precision

    precision = perimeter / error of closure

    939.46 ft / 0.1815 ft = 1:5,175

The same steps an agent gets from the MCP server with explain: true.

Accuracy: Exact arithmetic; the adjusted traverse closes to within 1e-9 of the unit

When to use this: Use the Bowditch adjustment when the governing survey specification calls for the compass rule, or when angles and distances were observed with roughly comparable relative precision. It is the common hand-computation rule for a closed plane traverse: inspect the unadjusted misclosure and precision first, then distribute that error by course length and carry the adjusted coordinates from the entered starting point.

Limitations: The compass rule is a conventional balancing method, not a way to find or repair a blunder. It assumes the selected rule is appropriate for the observations and spreads the closure error through every course. Directions and distances must already be reduced to one plane grid or local ground system, and all distances must use one linear unit. Legal boundary decisions still require the survey record and professional judgment.

Worked example: University of Memphis five-course compass adjustment. Source: University of Memphis CIVL 1112, Surveying - Traverse Calculations, page 4 balanced table. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Courses
S 6-15 W, 189.53 S 29-38 E, 175.18 N 81-18 W, 197.78 N 12-24 W, 142.39 N 42-59 E, 234.58
Start easting
0 ft
Start northing
0 ft

You get

Precision
1:5,175
Linear misclosure
0.182 ft
Misclosure direction
S 64°11'19" W
Σ latitudes
-0.079 ft
Σ departures
-0.1634 ft
Total length
939.46 ft
Precision ratio
5,175

Review: Not yet independently reviewed by a licensed surveyor.

Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources