Distance off by two bearings on the bow
Distance from an object at the second bearing and when abeam, from two bearings relative to the bow and the run between them (Bowditch Table 18), with the doubling-the-angle and bow-and-beam presets.
Planning and education aid. Not for primary navigation. Full disclaimer
Experimental: not yet fully verified. How results are checked
Distance off: 4.00 NM at the second bearing, 3.46 NM abeam.
- Distance at the second bearing
- Distance abeam
- First relative bearing
- Second relative bearing
- Assumes
Provenance
- Computed by
- navigation.piloting.two-bearing-fix 1.0.0, core 0.1.0
- Model
- Plane oblique triangle (Bowditch Table 18): distance at the second bearing = run × sin A / sin(B − A); abeam = that × sin B; doubling the angle (B = 2A) gives a distance equal to the run; bow and beam (45°, 90°) gives a distance abeam equal to the run
- Accuracy
- Exact for the plane triangle; Table 18 prints its factors to 0.01
- Notes
- 1 shown with the answer
- Cites
- National Geospatial-Intelligence Agency, The American Practical Navigator (Bowditch), NGA Pub. No. 9, Volume I
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Plane oblique triangle (Bowditch Table 18): distance at the second bearing = run × sin A / sin(B − A); abeam = that × sin B; doubling the angle (B = 2A) gives a distance equal to the run; bow and beam (45°, 90°) gives a distance abeam equal to the run
Show your work
Distance at second bearing
4.00 NM, A 30.0°, B 60.0°= 4.00 NMDistance abeam
4.00 × sin 60.0°= 4.00 NM at the second bearing, 3.46 NM abeam
The same steps an agent gets from the MCP server with explain: true.
Accuracy: Exact for the plane triangle; Table 18 prints its factors to 0.01
When to use this: Use this when one charted object is in sight: take its bearing relative to the bow twice as you pass, note the run between, and get the distance off now and when it will be abeam. Doubling the angle on the bow and the bow-and-beam bearing are the classic shortcuts, where the distance off equals the run.
Limitations: It assumes no current and a steady course and speed between the bearings, using the run over the ground; a current across the course makes the distance wrong, so treat it as a running fix of modest accuracy. The second bearing must be broader on the bow than the first and on the same side.
Worked example: Doubling the angle: 30° and 60° on the bow, 4.0 NM apart. Source: Distance off 4.0 NM at the second bearing, 3.46 NM abeam. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- First relative bearing
- 30 deg
- Method
- doubling
- Run between bearings
- 4 NM
You get
- Answer
- 4.00 NM at the second bearing, 3.46 NM abeam
- Distance at the second bearing
- 4 NM
- Distance abeam
- 3.46 NM
- First relative bearing
- 30°
- Second relative bearing
- 60°
- Assumes
- no current, steady course and speed
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-19, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- The American Practical Navigator (Bowditch), NGA Pub. No. 9, Volume I, National Geospatial-Intelligence Agency, 2024 edition. Chapter 11, Piloting (§1112 running fix; §1121 distance by two bearings, Table 18).
Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.