Running fix from one object
A running fix from two true bearings of one charted object and the ship's course and speed between them: the earlier bearing advanced by the run and crossed with the later one, with the fix, the run, and both lines of position for the chart.
Planning and education aid. Not for primary navigation. Full disclaimer
Experimental: not yet fully verified. How results are checked
Running fix: 36°52.4'N 75°59.9'W, 2.6 NM from the object.
| Line | Latitude | Longitude |
|---|---|---|
| 1 | 36.943477 deg | -75.960183 deg |
| 1 | 36.842095 deg | -76.016336 deg |
| 2 | 36.916667 deg | -76.000000 deg |
| 2 | 36.805720 deg | -75.997592 deg |
- Distance from the object at the fix
- Distance abeam
- Run between bearings
- Fix latitude
- Fix longitude
Provenance
- Computed by
- navigation.piloting.running-fix 1.0.0, core 0.1.0
- Model
- Relative bearings A = bearing₁ − course and B = bearing₂ − course; the object's distance at the second bearing run × sin A / sin(B − A), the solution of advancing the first line of position by the run (Bowditch §1112, §1121, Table 18); the fix placed from the object along the reciprocal of the second bearing by the WGS 84 geodesic
- Accuracy
- Exact for the plane triangle; as good as the bearings and the run made good
- Notes
- 1 shown with the answer
- Cites
- National Geospatial-Intelligence Agency, The American Practical Navigator (Bowditch), NGA Pub. No. 9, Volume I
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Relative bearings A = bearing₁ − course and B = bearing₂ − course; the object's distance at the second bearing run × sin A / sin(B − A), the solution of advancing the first line of position by the run (Bowditch §1112, §1121, Table 18); the fix placed from the object along the reciprocal of the second bearing by the WGS 84 geodesic
Show your work
Relative bearings
A = B₁ − C, B = B₂ − C024.0° and 359.0° on course 050.0°= 26.0° and 51.0°Distance at the second bearing
run 2.50 NM= 36°52.4'N 75°59.9'W, 2.6 NM from the object
The same steps an agent gets from the MCP server with explain: true.
Accuracy: Exact for the plane triangle; as good as the bearings and the run made good
When to use this: Use this when only one charted object is in sight and you take its bearing twice: the first line of position is advanced along the course by the distance run and crossed with the second. Give the object's charted position to get the fix itself and the lines to plot.
Limitations: It assumes the course and speed made good between the bearings are known; an unknown current moves the fix, the classic weakness of a running fix. The bearings must be on the same side and the second broader on the bow than the first. Lines are drawn as geodesics, which on these scales are the straight lines of the chart.
Worked example: A light bears 024° at 1130 and 359° at 1140, ship on 050° at 15 kn. Source: Bowditch 2024 §1121: 2.6 NM at 1140 and 2.0 NM abeam (Table 18 factors 1.04 and 0.81, run 2.5 NM).
You enter
- First bearing
- 24 deg
- Second bearing
- 359 deg
- Course
- 50 deg
- Object latitude
- 36°55'N
- Object longitude
- 76°00'W
- Speed
- 15 kt
- Time between bearings
- 10 min
You get
- Fix
- 36°52.4'N 75°59.9'W, 2.6 NM from the object
- Distance from the object at the fix
- 2.59 NM
- Distance abeam
- 2.02 NM
- Run between bearings
- 2.5 NM
- Fix latitude
- 36.873397°
- Fix longitude
- -75.99906°
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-19, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- The American Practical Navigator (Bowditch), NGA Pub. No. 9, Volume I, National Geospatial-Intelligence Agency, 2024 edition. Chapter 11, Piloting (§1112 running fix; §1121 distance by two bearings, Table 18).
Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.