Piloting
Chart-table arithmetic: current, dead reckoning, fixes, distance off, and compass conversion.
This group does the arithmetic of piloting as Bowditch teaches it: the current triangle, a dead-reckoning position, a running fix and distance off by two bearings, distance by vertical sextant angle, and the true-magnetic-compass chain. Mariners and navigation students use it beside the chart to check a plot. Start with compass conversion to turn a compass bearing into a true one you can lay down. The pitfall is forgetting the current: a dead-reckoning position and a running fix both assume it away.
Planning and education aid. Not for primary navigation. Full disclaimer
I want to find the course to steer through a current
- Current triangle (set and drift)
The three current-triangle problems of Bowditch: track and speed made good from course, speed, set, and drift; the course to steer for a course made good; and the course and speed to use for a course and speed made good.
I want to plot a dead-reckoning position
- Dead reckoning position
The position reached from a known position by course and speed over a time, or by course and distance, worked on the Mercator chart for short runs and along the rhumb line for longer ones.
I want to get a running fix from one light
- Running fix from one object
A running fix from two true bearings of one charted object and the ship's course and speed between them: the earlier bearing advanced by the run and crossed with the later one, with the fix, the run, and both lines of position for the chart.
I want to find distance off by doubling the angle on the bow
- Distance off by two bearings on the bow
Distance from an object at the second bearing and when abeam, from two bearings relative to the bow and the run between them (Bowditch Table 18), with the doubling-the-angle and bow-and-beam presets.
I want to find distance off by vertical sextant angle
- Distance by vertical sextant angle
Distance off an object of charted height from its vertical sextant angle: above the sea horizon for an object beyond it (Bowditch Table 15), or from its waterline for one within the horizon (Table 16).
I want to convert true, magnetic, and compass headings
- Compass conversion (true, magnetic, compass)
Converts a heading or bearing among true, magnetic, and compass with variation and deviation (east and west as Bowditch signs them), the compass error, a deviation table interpolated by magnetic heading, and the relative bearing.