geoprimsField-grade geospatial math

Exact Transverse Mercator to latitude and longitude

Converts an easting and northing on the exact transverse Mercator back to latitude and longitude, to nanometers anywhere on the ellipsoid.

Go the other way: Latitude and longitude to exact Transverse Mercator →

30°

That is 30°, 75°.

Longitude
Provenance
Computed by
geodesy.projection.tm-exact-inverse 1.0.0, core 0.1.0
Model
Exact transverse Mercator (Lee 1976) by Jacobi elliptic functions, inverted by Newton's method as in GeographicLib
Accuracy
Agrees with GeographicLib's TransverseMercatorProj within 0.1 µm; forward and back return the point to about 1e-13 degrees
Notes
None
Cites
Karney, C. F. F., Journal of Geodesy, Transverse Mercator with an accuracy of a few nanometers; International Association of Oil & Gas Producers (IOGP), Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2 (Guidance Note 7-2)

Something look off?

Your values

Showing an example. Change anything.
More options 4
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Exact transverse Mercator (Lee 1976) by Jacobi elliptic functions, inverted by Newton's method as in GeographicLib

Accuracy: Agrees with GeographicLib's TransverseMercatorProj within 0.1 µm; forward and back return the point to about 1e-13 degrees

When to use this: Use this to turn a transverse Mercator easting and northing back into latitude and longitude when the point may lie far from the central meridian, where the series loses accuracy, or when a result must be checked against an exact method.

Limitations: The parameters must be the grid's own and in its units. Near the branch point on the equator, 90(1 − e) degrees from the central meridian, where the map folds, the latitude and longitude from an easting and northing are less certain. The latitude and longitude are on the ellipsoid you choose, which should be the grid's; a sphere is not supported, since the series tool is exact for it.

Worked example: Back from 75 degrees out. Source: GeographicLib 2.7 TransverseMercatorProj -r -l 0 -k 0.9996 (exact): 30° N, 75° E. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Easting
7707953.714163 m
Central meridian
0 deg
Northing
7322160.469546 m
Scale factor on the central meridian
0.9996

You get

Latitude
30°
Longitude
75°

Review: Not yet independently reviewed by a geodesist.

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

WGS 84 semi-major axis
6378137 m — Department of Defense World Geodetic System 1984
WGS 84 inverse flattening
298.257223563 — Department of Defense World Geodetic System 1984

Sources