geoprimsField-grade geospatial math

Latitude and longitude to exact Transverse Mercator

Projects a latitude and longitude with the exact transverse Mercator, good to nanometers anywhere on the ellipsoid, not just near the central meridian.

Go the other way: Exact Transverse Mercator to latitude and longitude →

7,707,953.714m

Easting 7,707,953.714 m, northing 7,322,160.47 m.

Northing
Grid convergence
Scale along the meridian
Scale along the parallel
Provenance
Computed by
geodesy.projection.tm-exact-forward 1.0.0, core 0.1.0
Model
Exact transverse Mercator (Lee 1976) by Jacobi elliptic functions, ported from GeographicLib's TransverseMercatorExact
Accuracy
Agrees with GeographicLib's TransverseMercatorProj within 0.1 µm anywhere on the ellipsoid
Notes
None
Cites
Karney, C. F. F., Journal of Geodesy, Transverse Mercator with an accuracy of a few nanometers; International Association of Oil & Gas Producers (IOGP), Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2 (Guidance Note 7-2)

Something look off?

Your values

Showing an example. Change anything.
More options 4
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Exact transverse Mercator (Lee 1976) by Jacobi elliptic functions, ported from GeographicLib's TransverseMercatorExact

Accuracy: Agrees with GeographicLib's TransverseMercatorProj within 0.1 µm anywhere on the ellipsoid

When to use this: Use this when a transverse Mercator must hold far from its central meridian: a grid stretched well beyond its zone, a whole-hemisphere map, or a check on the series another program uses. It is the same projection as the series tool, computed with elliptic functions instead of a truncated series, so it stays exact where the series drifts by meters.

Limitations: It is slower than the series, which is already exact to 5 nanometers within 3,900 km of the central meridian, so for ordinary grids the series tool is the better choice. On the equator, 90(1 − e) degrees from the central meridian (82.636 degrees on WGS 84), the projection has a branch point where the map folds and stops being conformal, so near it a small move on the ground can be a large one on the grid. Points more than 90 degrees from the central meridian fold onto the far side of the grid, as the standard domain does.

Worked example: 75 degrees from the central meridian. Source: GeographicLib 2.7 TransverseMercatorProj -l 0 -k 0.9996 (exact), an independent implementation of the same method: E = 7,707,953.714 m, N = 7,322,160.470 m. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Latitude
30 deg
Longitude
75 deg
Central meridian
0 deg
Scale factor on the central meridian
0.9996

You get

Easting
7,707,953.714 m
Northing
7,322,160.47 m
Grid convergence
62.0892305°
Scale along the meridian
1.818307886
Scale along the parallel
1.818307886

Review: Not yet independently reviewed by a geodesist.

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

WGS 84 semi-major axis
6378137 m — Department of Defense World Geodetic System 1984
WGS 84 inverse flattening
298.257223563 — Department of Defense World Geodetic System 1984

Sources