Transverse Mercator to latitude and longitude
Converts an easting and northing on a Transverse Mercator you define back to latitude and longitude.
Go the other way: Latitude and longitude to Transverse Mercator →
That is 50.500000068°, 0.500000091°.
- Longitude
Provenance
- Computed by
- geodesy.projection.tm-inverse 1.0.0, core 0.1.0
- Model
- Transverse Mercator (EPSG method 9807) by Krüger's series to sixth order (Karney 2011)
- Accuracy
- 5 nm within 3,900 km of the central meridian; agrees with GeographicLib's series to a nanometer
- Notes
- None
- Cites
- International Association of Oil & Gas Producers (IOGP), Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2 (Guidance Note 7-2); Karney, C. F. F., Journal of Geodesy, Transverse Mercator with an accuracy of a few nanometers
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Transverse Mercator (EPSG method 9807) by Krüger's series to sixth order (Karney 2011)
Accuracy: 5 nm within 3,900 km of the central meridian; agrees with GeographicLib's series to a nanometer
When to use this: Use this to turn an easting and northing on a transverse Mercator grid other than UTM back into latitude and longitude: a British National Grid reference in meters, a Gauss-Krüger coordinate, or a local low-distortion grid, when you have its parameters. For UTM, the UTM tool already knows every zone's.
Limitations: The parameters must be the grid's own and in its units; nothing in the numbers says which grid they came from. Krüger's series is good to 5 nanometers within 3,900 km of the central meridian and is warned beyond. The latitude and longitude are on the ellipsoid you choose, which should be the grid's.
Worked example: Back to the IOGP example. Source: IOGP Guidance Note 7-2, 3.2.5 example reversed: 50°30' N, 0°30' E. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Easting
- 577274.99 m
- Ellipsoid
- airy1830
- False easting
- 400000 m
- False northing
- -100000 m
- Latitude of origin
- 49 deg
- Central meridian
- -2 deg
- Northing
- 69740.50 m
- Scale factor on the central meridian
- 0.9996012717
You get
- Latitude
- 50.500000068°
- Longitude
- 0.500000091°
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-09-24, added: Two new stable tools convert on a transverse Mercator you define, for grids other than UTM like the British National Grid and Gauss-Krüger zones. They use the same sixth-order series as UTM, good to 5 nanometers within 3,900 km of the central meridian, and warn beyond. They agree with GeographicLib's own implementation within a micrometer on 10,000 random points. State Plane's transverse Mercator zones now run through the same code, results unchanged. Changelog
Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- WGS 84 semi-major axis
6378137 m— Department of Defense World Geodetic System 1984- WGS 84 inverse flattening
298.257223563— Department of Defense World Geodetic System 1984
Sources
- Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2 (Guidance Note 7-2), International Association of Oil & Gas Producers (IOGP), Revised September 2019. Sections 3.2.1 (Lambert Conic Conformal), 3.2.2 (Polar Stereographic), 3.2.4 (Albers Equal Area), 3.3.3 (Equidistant Cylindrical), and 3.4.5 (Popular Visualisation Pseudo Mercator). Read free.
- Transverse Mercator with an accuracy of a few nanometers, Karney, C. F. F., Journal of Geodesy, Vol. 85, No. 8. pp. 475-485 (6th-order Krüger series).