geoprimsField-grade geospatial math

Rotor disk area and disk loading

The total area swept by a multirotor's propellers, the area of one, and the disk loading when the takeoff mass is given.

Planning and education aid. Not for primary navigation. Full disclaimer

0.6841m²

The rotors sweep 0.6841 m² in all.

Area of one rotor
Disk loading
Provenance
Computed by
drone.power.disk-area 1.0.0, core 0.1.0
Model
Disk area A = N × π × D² / 4 for N rotors of diameter D; disk loading = m × g₀ / A, with g₀ = 9.80665 m/s² (Leishman 2006, momentum theory)
Accuracy
Exact for the geometry; overlapping or ducted rotors are not allowed for
Notes
None
Cites
Leishman, J. G., Cambridge University Press, Principles of Helicopter Aerodynamics; Leishman, J. G., Embry-Riddle Aeronautical University, Introduction to Aerospace Flight Vehicles; International Civil Aviation Organization, Manual of the ICAO Standard Atmosphere, Doc 7488/3; Leishman, J. G., and Syal, M., Journal of the American Helicopter Society, Figure of Merit Definition for Coaxial Rotors

Something look off?

Your values

Showing an example. Change anything.
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Disk area A = N × π × D² / 4 for N rotors of diameter D; disk loading = m × g₀ / A, with g₀ = 9.80665 m/s² (Leishman 2006, momentum theory)

Accuracy: Exact for the geometry; overlapping or ducted rotors are not allowed for

When to use this: Use this when sizing propellers or comparing airframes. Enter the number of rotors and the propeller diameter to get the total swept area that momentum theory uses for hover power. Add the takeoff mass to get the disk loading, the weight carried by each square meter of disk, which sets how hard the rotors must work and how strong the downwash is.

Limitations: The area is that of separate, unobstructed disks. Rotors that overlap, sit in ducts, or are stacked as coaxial pairs do not act on the full area counted here, so use the hover power tool's coaxial setting for those. The diameter is the propeller's own, tip to tip. Disk loading says nothing about blade design or efficiency by itself.

Worked example: Six 15 in rotors carrying 6.2 kg. Source: Geometry: six 0.381 m disks are 0.684 m², carrying 60.8 N at 88.9 Pa. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Takeoff mass
6.2 kg
Rotor diameter
15 in
Rotors
6

You get

Total disk area
0.6841 m²
Area of one rotor
0.114 m²
Disk loading
88.88 Pa

Review: Not yet independently reviewed by a Part 107 remote pilot.

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

Standard gravity g0
9.80665 m/s2 — Manual of the ICAO Standard Atmosphere (Doc 7488)

Sources