Image footprint on the ground
The ground width, length, and area one nadir photo covers, from the height above ground, the sensor size, and the focal length.
Planning and education aid. Not for primary navigation. Full disclaimer
One photo covers 120 m across the flight line and 80 m along it.
- Footprint along track
- Footprint area
- Focal length used
Provenance
- Computed by
- drone.photogrammetry.footprint 1.0.0, core 0.1.0
- Model
- Similar triangles for a nadir frame camera: footprint = sensor dimension × height / focal length, across and along track (Wolf, Dewitt & Wilkinson 2014, ch. 6)
- Accuracy
- Exact for a nadir pinhole camera over flat ground
- Notes
- None
- Cites
- Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, Elements of Photogrammetry with Applications in GIS; Ruiz, J. J., Diaz-Mas, L., Perez, F., and Viguria, A.; ISPRS Archives, Evaluating the Accuracy of DEM Generation Algorithms from UAV Imagery
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Similar triangles for a nadir frame camera: footprint = sensor dimension × height / focal length, across and along track (Wolf, Dewitt & Wilkinson 2014, ch. 6)
Accuracy: Exact for a nadir pinhole camera over flat ground
When to use this: Use this to see how much ground one photo covers before planning lines or picking a height. Enter the height above ground, the sensor's width and height, and the focal length. The tool returns the footprint across and along the flight line and its area. Give a 35 mm-equivalent focal length by setting the focal length type; the crop factor then comes from the sensor size.
Limitations: The camera points straight down over flat ground, so a tilted gimbal or sloping terrain changes the shape and size of the footprint. Lens distortion and a rolling shutter are not modeled. The wider sensor side is taken across the flight line, which is how most mapping drones mount the camera. It reports coverage, not pixel size; the GSD tool gives that.
Worked example: A 1-inch sensor at 80 m. Source: Similar triangles: 13.2 × 80 / 8.8 is 120 m across and 8.8 × 80 / 8.8 is 80 m along. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Focal length
- 8.8 mm
- Height above ground
- 80 m
- Sensor height
- 8.8 mm
- Sensor width
- 13.2 mm
You get
- Footprint across track
- 120 m
- Footprint along track
- 80 m
- Footprint area
- 9,600 m²
- Focal length used
- 8.8 mm
Review: Not yet independently reviewed by a Part 107 remote pilot.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- 35 mm full-frame width used to derive a crop factor
36 mm— Elements of Photogrammetry with Applications in GIS- 35 mm full-frame height used to derive a crop factor
24 mm— Elements of Photogrammetry with Applications in GIS
Sources
- Elements of Photogrammetry with Applications in GIS, Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, 4th edition. Chapter 6 (vertical photographs: scale and ground coverage). Read free.
- Evaluating the Accuracy of DEM Generation Algorithms from UAV Imagery, Ruiz, J. J., Diaz-Mas, L., Perez, F., and Viguria, A.; ISPRS Archives, Volume XL-1/W2. Table 2: typical real-flight mapping parameters, including approximately 1–5 cm GSD. Read free.