geoprimsField-grade geospatial math

ASPRS checkpoint requirements

How many checkpoints a mapping project needs for its area under the Positional Accuracy Standards, Edition 2, and how accurate those checkpoints must be for the product's accuracy class.

Planning and education aid. Not for primary navigation. Full disclaimer

60

The project needs 60 checkpoints, 30 of them on open ground.

Checkpoints on open ground
Checkpoints in vegetation
Checkpoint horizontal accuracy
Checkpoint vertical accuracy
Provenance
Computed by
drone.photogrammetry.checkpoint-requirements 1.0.0, core 0.1.0
Model
ASPRS Edition 2, Table C.1, applied to the open and to the vegetated share of the area, each in whole km²: 30 checkpoints up to 500 km², then 5 more per 250 km², to 70 at 2,500 km². Checkpoints at least twice as accurate as the product: RMSE(checkpoint) ≤ ½ RMSE(product) (7.12)
Accuracy
The counts and ratios are the standard's own; a contract may ask for more
Notes
None
Cites
American Society for Photogrammetry and Remote Sensing, ASPRS Positional Accuracy Standards for Digital Geospatial Data, Edition 2

Something look off?

Your values

Showing an example. Change anything.
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: ASPRS Edition 2, Table C.1, applied to the open and to the vegetated share of the area, each in whole km²: 30 checkpoints up to 500 km², then 5 more per 250 km², to 70 at 2,500 km². Checkpoints at least twice as accurate as the product: RMSE(checkpoint) ≤ ½ RMSE(product) (7.12)

Accuracy: The counts and ratios are the standard's own; a contract may ask for more

When to use this: Use this when scoping the accuracy assessment of an orthomosaic, a drone survey, or a lidar surface. Enter the project area and, if part of it is vegetated, that share. The tool returns the number of checkpoints for open ground and for vegetation under Table C.1. Add the product's horizontal or vertical accuracy class to get how accurate the checkpoints themselves must be surveyed.

Limitations: Table C.1 stops at 2,500 km² of each land cover, where the standard leaves added checkpoints to the client. The counts are the standard's recommendation, so a contract or agency specification governs where it differs. It does not place the points; they should be spread across the project and its land cover, which the GCP and checkpoint plan tool lays out from a boundary. Ground control is separate from checkpoints.

Worked example: A 12 km² project, 25% vegetated, for a 5 cm product. Source: ASPRS Positional Accuracy Standards, Edition 2, Table C.1: 30 checkpoints for each land cover up to 500 km²; section 7.12. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Project area
12 km2
Horizontal accuracy class
5 cm
Vegetated share (%)
25
Vertical accuracy class
10 cm

You get

Checkpoints
60
Checkpoints on open ground
30
Checkpoints in vegetation
30
Checkpoint horizontal accuracy
2.5 cm
Checkpoint vertical accuracy
5 cm

Review: Not yet independently reviewed by a Part 107 remote pilot.

Last verified: 2026-09-25, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

Base checkpoint count (Table C.1)
30 checkpoints — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Base area ceiling (Table C.1)
500 km2 — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Checkpoint increment (Table C.1)
5 checkpoints — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Area per checkpoint increment (Table C.1)
250 km2 — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Maximum tabulated checkpoint count (Table C.1)
70 checkpoints — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Maximum tabulated area (Table C.1)
2500 km2 — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Required checkpoint-to-product accuracy ratio
2 — ASPRS Positional Accuracy Standards for Digital Geospatial Data

Sources

Terms

ASPRS: American Society for Photogrammetry and Remote Sensing
The society that publishes the Positional Accuracy Standards for Digital Geospatial Data used to state map accuracy. Source: ASPRS Positional Accuracy Standards for Digital Geospatial Data

ASPRS — American Society for Photogrammetry and Remote Sensing

The society that publishes the Positional Accuracy Standards for Digital Geospatial Data used to state map accuracy.

Source: ASPRS Positional Accuracy Standards for Digital Geospatial Data