geoprimsField-grade geospatial math

GCP and checkpoint plan

How many checkpoints an area needs under the ASPRS Positional Accuracy Standards, Edition 2, how accurate the ground control must be, and a suggested layout of ground control points and checkpoints inside the area.

Planning and education aid. Not for primary navigation. Full disclaimer

30

Survey 30 checkpoints and about 7 ground control points. Set the control to 2.5 cm horizontally or better. The layout is a rule of thumb.

Ground control points
PointLatitudeLongitudePlace
140.0000901 deg-104.9998829 degcorner
240.0000901 deg-104.9965971 degcorner
340.0008099 deg-104.9965971 degcorner
440.0008099 deg-104.9983571 degcorner
540.0026099 deg-104.9983571 degcorner
640.0026099 deg-104.9998829 degcorner
740.0006768 deg-104.9991200 degmiddle
Checkpoints on open ground
Ground control points
Area
GCP horizontal accuracy
GCP vertical accuracy
Checkpoint horizontal accuracy
Provenance
Computed by
drone.photogrammetry.gcp-plan 1.0.0, core 0.1.0
Model
Checkpoints: ASPRS Edition 2, Table C.1, on the open and on the vegetated share of the area, each in whole km²: 30 up to 500 km², then 5 more per 250 km², to 70 at 2,500 km². Control accuracy (7.9): RMSE_H(GCP) ≤ ½ RMSE_H(product); RMSE_V(GCP) ≤ ½ RMSE_V(DEM), or ≤ RMSE_H(product) for planimetric work only. Checkpoints twice as accurate as the product (7.12). Layout, a rule of thumb after Pix4D: one GCP inset from each corner that turns more than 20°, one at the point farthest from the edges, and a grid at the spacing given; checkpoints on an even grid between them. Every point passes the even-odd point-in-polygon test, clear of the edges by the inset, on a local transverse Mercator plane
Accuracy
Counts are the standard's table values. Positions are suggestions: every one is inside the area and at least the inset from its edges, but not checked for ground cover, slope, access, or visibility from the air.
Notes
None
Cites
American Society for Photogrammetry and Remote Sensing, ASPRS Positional Accuracy Standards for Digital Geospatial Data, Edition 2; Pix4D support documentation (PIX4Dmapper), Getting GCPs on the field or through other sources; GeoPrims, GeoPrims drone mission-planning specification

Something look off?

Your values

Showing an example. Change anything.
KML, KMZ, GPX, GeoJSON, CSV, WKT, or WKB — or drop it on the box. Read on this device.
More options 1
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Checkpoints: ASPRS Edition 2, Table C.1, on the open and on the vegetated share of the area, each in whole km²: 30 up to 500 km², then 5 more per 250 km², to 70 at 2,500 km². Control accuracy (7.9): RMSE_H(GCP) ≤ ½ RMSE_H(product); RMSE_V(GCP) ≤ ½ RMSE_V(DEM), or ≤ RMSE_H(product) for planimetric work only. Checkpoints twice as accurate as the product (7.12). Layout, a rule of thumb after Pix4D: one GCP inset from each corner that turns more than 20°, one at the point farthest from the edges, and a grid at the spacing given; checkpoints on an even grid between them. Every point passes the even-odd point-in-polygon test, clear of the edges by the inset, on a local transverse Mercator plane

Show your work

  1. Area

    the polygon less its holes, on a local plane

    6 corners = 0.06 km²

  2. Open-ground checkpoints

    ASPRS Table C.1: 30 up to 500 km², then 5 more per 250 km²

    0.06 km² open = 30

  3. Checkpoints

    open ground + vegetation

    30 + 0 = 30

The same steps an agent gets from the MCP server with explain: true.

Accuracy: Counts are the standard's table values. Positions are suggestions: every one is inside the area and at least the inset from its edges, but not checked for ground cover, slope, access, or visibility from the air.

When to use this: Use this when you plan ground control for a drone mapping job and will report accuracy by ASPRS Edition 2: it says how many checkpoints the area needs, how accurately the control and checkpoints must be surveyed for your accuracy class, and suggests where to put the targets, as coordinates you can load into a data collector.

Limitations: The checkpoint count is the standard's recommendation by area; a client can ask for more. The layout is a rule of thumb, not a requirement of the standard, and it cannot see the ground: move points off roofs, slopes over 10%, vegetation, and places a target cannot be seen from the air. It does not say how many GCPs a given accuracy needs; that depends on the camera, the flight, and the software.

Worked example: An L-shaped 6 ha site for a 5 cm map and a 10 cm surface. Source: ASPRS Edition 2, Table C.1: 30 checkpoints for an area of 500 km² or less; 7.9: GCPs to 2.5 cm horizontal and 5 cm vertical.

You enter

Area
40, -105 40, -104.99648 40.0009, -104.99648 40.0009, -104.99824 40.0027, -104.99824 40.0027, -105
Horizontal accuracy class
5 cm
Vertical accuracy class
10 cm

You get

Checkpoints
30
Checkpoints on open ground
30
Ground control points
7
Area
0.06 km²
GCP horizontal accuracy
2.5 cm
GCP vertical accuracy
5 cm
Checkpoint horizontal accuracy
2.5 cm
Checkpoint vertical accuracy
5 cm
Layout
A rule of thumb after Pix4D, not part of the ASPRS standard: a GCP 10 m inside each corner, one where the area is widest, and checkpoints on an even grid between them. Move any point that lands on a roof, slope, vegetation, or hidden spot.

Review: Not yet independently reviewed by a Part 107 remote pilot.

Last verified: 2026-09-25, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 20 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

Base checkpoint count (Table C.1)
30 checkpoints — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Base area ceiling (Table C.1)
500 km2 — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Checkpoint increment (Table C.1)
5 checkpoints — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Area per checkpoint increment (Table C.1)
250 km2 — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Maximum tabulated checkpoint count (Table C.1)
70 checkpoints — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Maximum tabulated area (Table C.1)
2500 km2 — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Required GCP-to-product accuracy ratio
2 — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Required checkpoint-to-product accuracy ratio
2 — ASPRS Positional Accuracy Standards for Digital Geospatial Data
Default boundary inset (product choice)
10 m — GeoPrims drone mission-planning specification

Sources

Terms

GCP: ground control point
A marked point on the ground whose position is surveyed, used to tie aerial imagery to real-world coordinates. Checkpoints are surveyed the same way but kept out of processing, to test the result. Source: ASPRS Positional Accuracy Standards for Digital Geospatial Data