geoprimsField-grade geospatial math

Drone mapping day

Plan a mapping flight from the resolution you need: height, photos, batteries and swap points, line of sight from where you stand, and the light.

For drone operators · 10 steps, worked out together from your values

Planning and education aid. Not for primary navigation. Check every value before you rely on it. Full disclaimer

Your values

Showing an example. Change anything.
Use my drone

Loading…

Use my camera

Loading…

More options

All 10 steps worked out from your values.

  1. Step 1

    Height for a target GSD

    Fly at 72.96 m above ground for that GSD.

    The height that gives a 2 cm ground sampling distance with this camera.

  2. Step 2

    Part 107 maximum altitude

    You may fly up to 400 ft above the ground here. Not legal advice.

    Check that height against the Part 107 ceiling of 400 ft above ground.

  3. Step 3

    Ground sampling distance (GSD)

    Each pixel covers 2 cm of ground, and one image spans 109.4 m across track.

    The GSD at that height, along and across the flight line.

  4. Step 4

    Overlap, trigger interval, and line spacing

    Take a photo every 2.28 s (18.2 m) and space flight lines 38.3 m apart.

    75% front and 65% side overlap at 8 m/s set the photo interval and line spacing.

  5. Step 5

    Motion blur and slowest shutter

    The image smears 0.4 pixels; keep the shutter at 1/800 s or faster.

    At 8 m/s and 1/1000 s, is blur under half a pixel?

  6. Step 6

    Survey grid (lawnmower pattern)

    Fly 15 lines for 10.63 km and about 570 photos. That takes about 22.1 min.

    The flight lines over your area, the photo count, and the flying time.

  7. Step 7

    Mission sorties and battery swaps

    The mission takes 2 batteries and about 26.2 min of flying.

    How many batteries, and where each flight ends so the next one picks up there, counting the trip home.

  8. Step 8

    Visual line of sight over a mission

    The farthest waypoint is 956 m from you. 28 are past your 134 m range. Seeing the drone is your call on the day. Not legal advice.

    Whether every waypoint stays within sight of where you stand (14 CFR 107.31).

  9. Step 9

    Mapping light window

    The sun is high enough from 08:23 to 17:40.

    When the sun is high enough for even light and short shadows.

  10. Step 10

    Export a mission (KML, GeoJSON, CSV)

    The file has 30 waypoints, with heights above the ground.

    The flight lines as a KML file for your planning app, every waypoint at the flight height above ground.

Assumptions (2)

Values this workflow fixes for you. Open the step's tool to change one.

  • Step 8, Visual line of sight over a mission: Characteristic dimension = 0.35 m (change)
  • Step 10, Export a mission (KML, GeoJSON, CSV): Heights are = agl (change)