Latitude and longitude to Hotine Oblique Mercator
Projects a latitude and longitude with a Hotine Oblique Mercator you define, a Mercator whose central line runs at any angle, for regions that lie along a slanted band.
Go the other way: Hotine Oblique Mercator to latitude and longitude →
Easting 679,245.728 m, northing 596,562.777 m.
- Northing
- Grid convergence
- Scale along the meridian
- Scale along the parallel
Provenance
- Computed by
- geodesy.projection.hotine-forward 1.0.0, core 0.1.0
- Model
- Hotine Oblique Mercator variants A and B (EPSG methods 9812 and 9815)
- Accuracy
- Exact to double precision; agrees with PROJ within 1 mm
- Notes
- None
- Cites
- International Association of Oil & Gas Producers (IOGP), Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2 (Guidance Note 7-2)
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Hotine Oblique Mercator variants A and B (EPSG methods 9812 and 9815)
Accuracy: Exact to double precision; agrees with PROJ within 1 mm
When to use this: Use this for grids built on a slanted central line: the Alaska panhandle's state plane zone, the rectified skew orthomorphic grids of Malaysia and Borneo, the Swiss and Hungarian national grids in their Hotine form, and corridor projections for pipelines or railways that run diagonally. Give the center, the azimuth of the line, and the grid's other parameters.
Limitations: It keeps shapes and is true to scale times the scale factor along the central line, but the scale grows away from it, so it suits a band a few hundred kilometers wide. Far from the line, near the two poles of the oblique projection, points run off to infinity and are refused. Variant A and variant B differ only in where the falsings sit, so choosing the wrong one shifts every point by a constant amount. The convergence and scales come from differences of the map, good to about 1e-9.
Worked example: The IOGP example: Timbalai 1948 / RSO Borneo. Source: IOGP Guidance Note 7-2, 3.2.4 example (variant B): E = 679,245.73 m, N = 596,562.78 m. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Custom semi-major axis
- 6377298.556 m
- Azimuth of the initial line
- 53°18'56.9537"
- Easting at the center (B) or false easting (A)
- 590476.87 m
- Northing at the center (B) or false northing (A)
- 442857.65 m
- Custom inverse flattening
- 300.8017
- Latitude
- 5°23'14.1129"N
- Latitude of the projection center
- 4 deg
- Longitude
- 115°48'19.8196"E
- Longitude of the projection center
- 115 deg
- Angle from the rectified to the skew grid
- 53°07'48.3685"
- Scale factor on the initial line
- 0.99984
You get
- Easting
- 679,245.728 m
- Northing
- 596,562.777 m
- Grid convergence
- 0.2435661°
- Scale along the meridian
- 0.999900131
- Scale along the parallel
- 0.999900131
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-19, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-09-24, added: Two new stable tools convert on a Hotine Oblique Mercator you define, variant A or B: the projection for grids along a slanted band, like the Alaska panhandle's state plane zone and the Malaysian and Borneo grids. They reproduce the RSO Borneo example in IOGP Guidance Note 7-2 and agree with PROJ within a micrometer on 10,000 random points. State Plane's Alaska zone 1 now uses the same code, with its results unchanged. Changelog
Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- WGS 84 semi-major axis
6378137 m— Department of Defense World Geodetic System 1984- WGS 84 inverse flattening
298.257223563— Department of Defense World Geodetic System 1984
Sources
- Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2 (Guidance Note 7-2), International Association of Oil & Gas Producers (IOGP), Revised September 2019. Sections 3.2.1 (Lambert Conic Conformal), 3.2.2 (Polar Stereographic), 3.2.4 (Albers Equal Area), 3.3.3 (Equidistant Cylindrical), and 3.4.5 (Popular Visualisation Pseudo Mercator). Read free.