geoprimsField-grade geospatial math

Latitude and longitude to Lambert Conformal Conic

Projects a latitude and longitude with a Lambert Conformal Conic you define: one or two standard parallels, origin, false easting and northing, on any ellipsoid.

Go the other way: Lambert Conformal Conic to latitude and longitude →

903,277.799m

Easting 903,277.799 m, northing 77,650.943 m.

Northing
Grid convergence
Scale along the meridian
Scale along the parallel
Provenance
Computed by
geodesy.projection.lcc-forward 1.0.0, core 0.1.0
Model
Lambert Conic Conformal 1SP and 2SP (EPSG methods 9801 and 9802)
Accuracy
Exact to double precision; agrees with PROJ within 1 mm
Notes
None
Cites
International Association of Oil & Gas Producers (IOGP), Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2 (Guidance Note 7-2)

Something look off?

Your values

Showing an example. Change anything.
More options 7
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Lambert Conic Conformal 1SP and 2SP (EPSG methods 9801 and 9802)

Accuracy: Exact to double precision; agrees with PROJ within 1 mm

When to use this: Use this when a grid is a Lambert Conformal Conic that is not in a ready-made list: a national or regional grid, an aeronautical chart, a local engineering projection, or one you are designing. Give its parameters as its definition states them and get the easting and northing, with the grid convergence and the scale at the point.

Limitations: It computes the projection you describe; it does not know which grid a coordinate belongs to, and parameters copied with a wrong sign, a latitude of origin swapped for a standard parallel, or feet taken for meters give a clean but wrong answer. The pole on the far side of the cone projects to infinity and is refused. For State Plane zones, the state plane tool already has every zone's parameters. Coordinates are on the ellipsoid you choose; a datum shift is a separate step.

Worked example: The IOGP example: NAD27 Texas South Central. Source: IOGP Guidance Note 7-2, 3.2.1.1 example: E = 2,963,503.91 ftUS, N = 254,759.80 ftUS. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Ellipsoid
clarke1866
False easting
2000000 ftUS
Latitude
28°30'00"N
Latitude of origin
27°50'
Longitude
96°00'00"W
Longitude of origin
-99 deg
First standard parallel
28°23'
Second standard parallel
30°17'

You get

Easting
903,277.799 m
Northing
77,650.943 m
Grid convergence
1.4697379°
Scale along the meridian
0.999968559
Scale along the parallel
0.999968559

Review: Not yet independently reviewed by a geodesist.

Last verified: 2026-09-19, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

WGS 84 semi-major axis
6378137 m — Department of Defense World Geodetic System 1984
WGS 84 inverse flattening
298.257223563 — Department of Defense World Geodetic System 1984

Sources