Gnomonic to latitude and longitude
Converts an easting and northing on the ellipsoidal gnomonic you center back to latitude and longitude.
That is 60°, -30°.
- Longitude
Provenance
- Computed by
- geodesy.projection.gnomonic-inverse 1.0.0, core 0.1.0
- Model
- Ellipsoidal gnomonic by the geodesic (Karney 2013, section 8), inverted by Newton's method
- Accuracy
- Agrees with GeographicLib's GeodesicProj to a nanometer near the center
- Notes
- None
- Cites
- Karney, C. F. F., Journal of Geodesy, Algorithms for geodesics
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Ellipsoidal gnomonic by the geodesic (Karney 2013, section 8), inverted by Newton's method
Accuracy: Agrees with GeographicLib's GeodesicProj to a nanometer near the center
When to use this: Use this to bring a point found on a gnomonic plane back to latitude and longitude: the crossing of two routes drawn as straight lines on a gnomonic chart, or any result of plane geometry done where geodesics are straight, when you know the center.
Limitations: Every easting and northing has a point, but one far from the center lies close to the horizon a quarter of the way round the Earth, where a small move on the grid is a large one on the ground, so the latitude and longitude are less certain there. The point is found by Newton's method on the geodesic from the center, as GeographicLib does, and one that does not settle is refused. The center must be the grid's own.
Worked example: Back to the Arctic point. Source: GeographicLib 2.x GeodesicProj -g 40 -100 -r: 60° N, 30° W.
You enter
- Easting
- 4371212.818782 m
- Latitude of the center
- 40 deg
- Longitude of the center
- -100 deg
- Northing
- 5140517.234103 m
You get
- Latitude
- 60°
- Longitude
- -30°
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-09-24, added: Four new stable tools map points around a center you choose, and back: the azimuthal equidistant, where the distance and direction from the center are the true geodesic ones, and the gnomonic, where geodesics through the center are straight lines. The gnomonic refuses points 90 degrees or more from its center. Both agree with GeographicLib's GeodesicProj within a micrometer on 10,000 random points each, and the azimuthal equidistant reproduces the Yap Islands example in IOGP Guidance Note 7-2. Changelog
Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- WGS 84 semi-major axis
6378137 m— Department of Defense World Geodetic System 1984- WGS 84 inverse flattening
298.257223563— Department of Defense World Geodetic System 1984
Sources
- Algorithms for geodesics, Karney, C. F. F., Journal of Geodesy, Vol. 87, No. 1. pp. 43-55, sections 8 (gnomonic) and 9 (azimuthal equidistant).