Latitude and longitude to Gnomonic
Projects a latitude and longitude onto the ellipsoidal gnomonic centered where you choose, where geodesics through the center are straight lines and all others nearly are.
Easting 4,371,212.819 m, northing 5,140,517.234 m.
- Northing
- Grid convergence
- Scale along the meridian
- Scale along the parallel
Provenance
- Computed by
- geodesy.projection.gnomonic-forward 1.0.0, core 0.1.0
- Model
- Ellipsoidal gnomonic by the geodesic (Karney 2013, section 8)
- Accuracy
- Agrees with GeographicLib's GeodesicProj to a nanometer near the center
- Notes
- None
- Cites
- Karney, C. F. F., Journal of Geodesy, Algorithms for geodesics
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Ellipsoidal gnomonic by the geodesic (Karney 2013, section 8)
Accuracy: Agrees with GeographicLib's GeodesicProj to a nanometer near the center
When to use this: Use this when the shortest path must be a straight line on the map: planning great-circle routes on a chart, intersecting geodesics with plane geometry, or testing whether a point lies on the line between two others. Every geodesic through the center is straight, and near the center every geodesic is straight to within a tiny error.
Limitations: The gnomonic shows less than a hemisphere: a point a quarter of the way round the Earth or more from the center has no image and is refused. Toward that horizon the scale grows without bound, so it suits a region a few thousand kilometers across. On the ellipsoid, geodesics that do not pass through the center are only nearly straight: within 1,000 km of the center they bow by well under a millimeter.
Worked example: The Arctic, seen from the middle of North America. Source: GeographicLib 2.x GeodesicProj -g 40 -100: x = 4,371,212.819 m, y = 5,140,517.234 m. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Latitude
- 60 deg
- Latitude of the center
- 40 deg
- Longitude
- -30 deg
- Longitude of the center
- -100 deg
You get
- Easting
- 4,371,212.819 m
- Northing
- 5,140,517.234 m
- Grid convergence
- 60.5570578°
- Scale along the meridian
- 1.469370033
- Scale along the parallel
- 2.108034252
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-09-24, added: Four new stable tools map points around a center you choose, and back: the azimuthal equidistant, where the distance and direction from the center are the true geodesic ones, and the gnomonic, where geodesics through the center are straight lines. The gnomonic refuses points 90 degrees or more from its center. Both agree with GeographicLib's GeodesicProj within a micrometer on 10,000 random points each, and the azimuthal equidistant reproduces the Yap Islands example in IOGP Guidance Note 7-2. Changelog
Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- WGS 84 semi-major axis
6378137 m— Department of Defense World Geodetic System 1984- WGS 84 inverse flattening
298.257223563— Department of Defense World Geodetic System 1984
Sources
- Algorithms for geodesics, Karney, C. F. F., Journal of Geodesy, Vol. 87, No. 1. pp. 43-55, sections 8 (gnomonic) and 9 (azimuthal equidistant).