Orthometric height to ellipsoidal height
Converts a height above the geoid, close to mean sea level (H), to a height above the WGS 84 ellipsoid (h = H + N).
Go the other way: Ellipsoidal height to orthometric height →
The ellipsoidal height is 1,639.723 m. The geoid is 15.277 m below the ellipsoid here.
- EGM96 heights approximate global mean sea level. They are not NAVD 88 (use GEOID18 in the US) and can differ from local vertical datums by a meter or more.
- Geoid height N
- Orthometric height H
Provenance
- Computed by
- geodesy.height.orthometric-to-ellipsoidal 1.0.0, core 0.1.0
- Model
- EGM96 geoid, 15′ grid, 12-point cubic interpolation
- Accuracy
- As good as the geoid: about 0.5-1 m for EGM96. Exact arithmetic otherwise.
- Reference data
- version 2009-08-29 of a reference dataset
- Notes
- 1 shown with the answer
- Cites
- Lemoine, F. G., et al., NASA Goddard Space Flight Center, The Development of the Joint NASA GSFC and NIMA Geopotential Model EGM96, NASA/TP-1998-206861; Karney, C. F. F., GeographicLib, GeographicLib Geoid class and geoid data
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: h = H + N, with N the EGM96 geoid height at the point, interpolated from the 15-minute grid
Accuracy: As good as the geoid: about 0.5-1 m for EGM96. Exact arithmetic otherwise.
When to use this: Use this to give a GNSS system a height it understands: a waypoint altitude for a drone that flies in ellipsoidal height, a control point from a map elevation, or a terrain height for a ground-clearance check against GNSS. Enter the latitude, longitude, and height above sea level. The tool returns the ellipsoidal height and the geoid height N it added.
Limitations: A map or chart elevation is usually on a national vertical datum, not EGM96, so the result can be off by the difference between the two. EGM96 is a global geoid model good to about half a meter to a meter against leveled benchmarks, worse in mountains, and it is not a national vertical datum: in the United States, NAVD 88 heights need GEOID18 and NAD 83 ellipsoid heights, which differ by up to a couple of meters.
Worked example: A summit elevation near Boulder, Colorado. Source: EGM96 15-minute grid, interpolated as GeographicLib does. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Orthometric height H
- 1655 m
- Latitude
- 40.015 deg
- Longitude
- -105.2705 deg
You get
- Ellipsoidal height h
- 1,639.723 m
- Geoid height N
- -15.277 m
- Orthometric height H
- 1,655 m
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-10-14, changed: Ten focused geodesy operations are now stable: degree lengths and meridian arcs (held to GeographicLib), the MGRS grid-zone lookup and reference precision (NGA's GeoTrans), both directions of the height conversion (GeographicLib's GeoidEval), the WMM and IGRF comparison and the compass reliability zone (pygeomag and ppigrf), and UTM convergence and scale factor (GeographicLib's exact transverse Mercator). A new invariants test checks each note's stated properties. Results are unchanged. Changelog
Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- The Development of the Joint NASA GSFC and NIMA Geopotential Model EGM96, NASA/TP-1998-206861, Lemoine, F. G., et al., NASA Goddard Space Flight Center, NASA/TP-1998-206861. Geoid undulations relative to WGS 84.
- GeographicLib Geoid class and geoid data, Karney, C. F. F., GeographicLib, GeographicLib 2.x (egm96-15 grid, 2009-08-29). Geoid height interpolation: bilinear and 12-point cubic least-squares fit. Read free.
Terms
- EGM96: Earth Gravitational Model 1996
- A global gravity model whose geoid converts GPS ellipsoid heights to heights above mean sea level, to within about a meter. Source: EGM96 geopotential model and geoid
EGM96 — Earth Gravitational Model 1996
A global gravity model whose geoid converts GPS ellipsoid heights to heights above mean sea level, to within about a meter.
Source: EGM96 geopotential model and geoid