Ellipsoidal height to orthometric height
Converts a GPS height above the 84 ellipsoid (h) to a height above the EGM96 geoid, close to mean sea level (H = h − N).
Go the other way: Orthometric height to ellipsoidal height →
The height above the geoid is 398.345 m. The geoid is 49.855 m above the ellipsoid here.
- EGM96 heights approximate global mean sea level. They are not NAVD 88 (use GEOID18 in the US) and can differ from local vertical datums by a meter or more.
- Geoid height N
- Ellipsoidal height h
Provenance
- Computed by
- geodesy.height.ellipsoidal-to-orthometric 1.0.0, core 0.1.0
- Model
- EGM96 geoid, 15′ grid, 12-point cubic interpolation
- Accuracy
- As good as the geoid: about 0.5-1 m for EGM96. Exact arithmetic otherwise.
- Reference data
- version 2009-08-29 of a reference dataset
- Notes
- 1 shown with the answer
- Cites
- Lemoine, F. G., et al., NASA Goddard Space Flight Center, The Development of the Joint NASA GSFC and NIMA Geopotential Model EGM96, NASA/TP-1998-206861; Karney, C. F. F., GeographicLib, GeographicLib Geoid class and geoid data
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: H = h − N, with N the EGM96 geoid height at the point, interpolated from the 15-minute grid
Accuracy: As good as the geoid: about 0.5-1 m for EGM96. Exact arithmetic otherwise.
When to use this: Use this when a GNSS receiver, a drone log, or a lidar point cloud gives height above the ellipsoid and you need it against sea level, a map, or an airfield elevation. Enter the latitude, longitude, and ellipsoidal height. The tool returns the orthometric height above the EGM96 geoid and the geoid height N it subtracted.
Limitations: A GNSS height is ellipsoidal unless the receiver says otherwise, and some apps already show MSL, so check before converting twice. EGM96 is a global geoid model good to about half a meter to a meter against leveled benchmarks, worse in mountains, and it is not a national vertical datum: in the United States, NAVD 88 heights need GEOID18 and NAD 83 ellipsoid heights, which differ by up to a couple of meters.
Worked example: A drone over Lake Geneva. Source: EGM96 15-minute grid, interpolated as GeographicLib does. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Ellipsoidal height h
- 448.2 m
- Latitude
- 46.452 deg
- Longitude
- 6.583 deg
You get
- Orthometric height H
- 398.345 m
- Geoid height N
- 49.855 m
- Ellipsoidal height h
- 448.2 m
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-10-14, changed: Ten focused geodesy operations are now stable: degree lengths and meridian arcs (held to GeographicLib), the MGRS grid-zone lookup and reference precision (NGA's GeoTrans), both directions of the height conversion (GeographicLib's GeoidEval), the WMM and IGRF comparison and the compass reliability zone (pygeomag and ppigrf), and UTM convergence and scale factor (GeographicLib's exact transverse Mercator). A new invariants test checks each note's stated properties. Results are unchanged. Changelog
Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- The Development of the Joint NASA GSFC and NIMA Geopotential Model EGM96, NASA/TP-1998-206861, Lemoine, F. G., et al., NASA Goddard Space Flight Center, NASA/TP-1998-206861. Geoid undulations relative to WGS 84.
- GeographicLib Geoid class and geoid data, Karney, C. F. F., GeographicLib, GeographicLib 2.x (egm96-15 grid, 2009-08-29). Geoid height interpolation: bilinear and 12-point cubic least-squares fit. Read free.
Terms
- WGS: World Geodetic System
- The US Department of Defense global reference frame and ellipsoid that GPS uses; the current version is WGS 84. Source: Department of Defense World Geodetic System 1984
WGS — World Geodetic System
The US Department of Defense global reference frame and ellipsoid that GPS uses; the current version is WGS 84.
Source: Department of Defense World Geodetic System 1984