Precision of an MGRS reference
How precise an or USNG reference is: the size of the square its digits name, and the same reference at every coarser precision.
The reference names a 1 m square, 5 digits a side.
| Reference | Square |
|---|---|
| 17TNE86307777 | 10 m |
| 17TNE863777 | 100 m |
| 17TNE8677 | 1 km |
| 17TNE87 | 10 km |
| 17TNE | 100 km |
- Digits per coordinate
- Square size
Provenance
- Computed by
- geodesy.grid-ref.mgrs-precision 1.0.0, core 0.1.0
- Model
- An MGRS reference names a square: with n digits per coordinate it is 10^(5 − n) m across; a coarser reference keeps the first digits of each coordinate, never rounds (NGA MGRS)
- Accuracy
- Exact: precision is set by the count of digits
- Notes
- None
- Cites
- National Geospatial-Intelligence Agency, Military Grid Reference System, NGA.STND.0037; Karney, C. F. F., GeographicLib, GeographicLib MGRS and UTMUPS classes
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: An MGRS reference names a square: with n digits per coordinate it is 10^(5 − n) m across; a coarser reference keeps the first digits of each coordinate, never rounds (NGA MGRS)
Accuracy: Exact: precision is set by the count of digits
When to use this: Use this when a grid reference arrives and you need to know how much ground it pins down, or to shorten it for a radio call or a map label without moving it. Paste the reference with or without spaces. The tool returns the size of the square it names, such as 10 m for four digits a side, and the same reference cut to every coarser precision down to the 100 km square.
Limitations: MGRS references are truncated, never rounded, so a coarser reference names the square that contains the finer one, and its south-west corner is not the nearest point. The precision is what the digits claim, not how accurately the position was measured. References with more than five digits a side name squares smaller than a meter, which the standard allows but few receivers mean.
Worked example: A 10-digit reference in Pittsburgh. Source: NGA MGRS: five digits a side name a 1 m square. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- MGRS reference
- 17T NE 86309 77770
You get
- Precision
- 1 m
- Digits per coordinate
- 5
- Square size
- 1 m
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-10-14, changed: Ten focused geodesy operations are now stable: degree lengths and meridian arcs (held to GeographicLib), the MGRS grid-zone lookup and reference precision (NGA's GeoTrans), both directions of the height conversion (GeographicLib's GeoidEval), the WMM and IGRF comparison and the compass reliability zone (pygeomag and ppigrf), and UTM convergence and scale factor (GeographicLib's exact transverse Mercator). A new invariants test checks each note's stated properties. Results are unchanged. Changelog
Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Military Grid Reference System, NGA.STND.0037, National Geospatial-Intelligence Agency, NGA.STND.0037_2.0.0_GRIDS. MGRS lettering (AA scheme) and truncation. Read free.
- GeographicLib MGRS and UTMUPS classes, Karney, C. F. F., GeographicLib, GeographicLib 2.x. MGRS.cpp: band tolerance, square validation, UPS lettering. Read free.
Terms
- MGRS: Military Grid Reference System
- UTM and UPS coordinates written as a zone, a latitude band, a two-letter 100 km square, and digits, like 17T NE 86309 77770. Source: NGA.STND.0037 MGRS
MGRS — Military Grid Reference System
UTM and UPS coordinates written as a zone, a latitude band, a two-letter 100 km square, and digits, like 17T NE 86309 77770.
Source: NGA.STND.0037 MGRS