Grid zone and 100 km square in MGRS
The grid zone designator and 100 km square identifier for a latitude and longitude, the first five characters of any MGRS reference there.
The point is in grid zone 33X, 100 km square WG: references there begin 33XWG.
- Grid zone designator
- 100 km square identifier
Provenance
- Computed by
- geodesy.grid-ref.grid-zone-lookup 1.0.0, core 0.1.0
- Model
- NGA MGRS over UTM and UPS: AA lettering, or AL on the legacy Clarke 1866 and Bessel 1841 ellipsoids
- Accuracy
- Exact: the zone, band, and square follow from the point's UTM or UPS coordinates
- Notes
- None
- Cites
- National Geospatial-Intelligence Agency, Military Grid Reference System, NGA.STND.0037; Karney, C. F. F., GeographicLib, GeographicLib MGRS and UTMUPS classes
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: NGA MGRS over UTM and UPS: AA lettering, or AL on the legacy Clarke 1866 and Bessel 1841 ellipsoids
Accuracy: Exact: the zone, band, and square follow from the point's UTM or UPS coordinates
When to use this: Use this to find which MGRS or USNG map square a place falls in: to label a map sheet, set up a GPS receiver's grid, or check that a reference someone gave is in the right area. Enter the latitude and longitude. The tool returns the grid zone designator, such as 17T, the 100 km square letters, such as NE, and the two together, which begin every reference in that square.
Limitations: Squares are cut on UTM or UPS grid lines, so a place near a zone or band edge can be in a different square than a nearby one, and Norway and Svalbard use the zone exceptions. Near the poles the designator is a single UPS letter. The lettering follows the datum: Clarke 1866 and Bessel 1841 use the older AL scheme. It gives the square, not a position within it.
Worked example: Longyearbyen, Svalbard. Source: NGA MGRS grid zones, including the Svalbard exception. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Latitude
- 78.2232 deg
- Longitude
- 15.6267 deg
You get
- Grid zone and 100 km square
- 33XWG
- Grid zone designator
- 33X
- 100 km square identifier
- WG
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-10-14, changed: Ten focused geodesy operations are now stable: degree lengths and meridian arcs (held to GeographicLib), the MGRS grid-zone lookup and reference precision (NGA's GeoTrans), both directions of the height conversion (GeographicLib's GeoidEval), the WMM and IGRF comparison and the compass reliability zone (pygeomag and ppigrf), and UTM convergence and scale factor (GeographicLib's exact transverse Mercator). A new invariants test checks each note's stated properties. Results are unchanged. Changelog
Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Military Grid Reference System, NGA.STND.0037, National Geospatial-Intelligence Agency, NGA.STND.0037_2.0.0_GRIDS. MGRS lettering (AA scheme) and truncation. Read free.
- GeographicLib MGRS and UTMUPS classes, Karney, C. F. F., GeographicLib, GeographicLib 2.x. MGRS.cpp: band tolerance, square validation, UPS lettering. Read free.
Terms
- MGRS: Military Grid Reference System
- UTM and UPS coordinates written as a zone, a latitude band, a two-letter 100 km square, and digits, like 17T NE 86309 77770. Source: NGA.STND.0037 MGRS
MGRS — Military Grid Reference System
UTM and UPS coordinates written as a zone, a latitude band, a two-letter 100 km square, and digits, like 17T NE 86309 77770.
Source: NGA.STND.0037 MGRS