Coordinate system to coordinate system
Converts coordinates from one coordinate system to another, such as State Plane to UTM, through every step between: the inverse projection, the datum and frame changes at an epoch, and the forward projection, each with its accuracy.
In WGS 84 / UTM zone 13N that is 495,731.771 m E, 4,397,345.388 m N, to about 0.028 m from the datum steps.
- EPSG's WGS 84 names several realizations; it was taken as the current one, WGS 84 (G2296).
| Step | Method | Accuracy |
|---|---|---|
| Inverse projection | SPCS83 Colorado Central (0502), Lambert conformal conic | 0.000 m |
| Frame transformation | NAD83(2011) → ITRF2020 at 2026: NGS HTDP 3.6.0 14-parameter transformation | 0.020 m |
| Frame transformation | ITRF2020 → WGS84(G2296) at 2026: WGS 84 aligned with the ITRF (no change) | 0.020 m |
| Forward projection | UTM zone 13N, transverse Mercator (Krüger series) | 0.000 m |
- Easting
- Northing
- Accuracy
- Target system
Provenance
- Computed by
- geodesy.crs.transform 1.0.0, core 0.1.0
- Model
- Inverse projection on the source system's ellipsoid, the frame path of the datum transformation tool at the epoch, and the forward projection, applied in turn
- Accuracy
- About 2.8 cm (1σ), the root sum of squares of the frame steps' stated uncertainties; the projections are exact and the coordinates' own accuracy is not included.
- Notes
- 1 shown with the answer
- Cites
- IOGP, Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2 (Guidance Note 7-2); IOGP, EPSG Geodetic Parameter Dataset (EPSG v13.102 CRS registry)
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Inverse projection on the source system's ellipsoid, the frame path of the datum transformation tool at the epoch, and the forward projection, applied in turn
Accuracy: The projections are exact formulas; the frame steps carry their published uncertainties, summed as a root sum of squares. The coordinates' own accuracy is not included.
When to use this: Use this when coordinates come in one system and are needed in another and the two may sit on different datums: State Plane on NAD 83 (2011) to UTM on WGS 84 for a drone or GIS layer, UTM to geographic, or feet to meters between the same zone’s twins. Give both EPSG codes, the coordinates, and the epoch they are for, and it lists every step it took and how sure each is.
Limitations: It works between the systems the coordinate system finder lists on WGS 84 and NAD 83 (2011). NAD 27 and the original NAD 83 move by the NADCON5 grids, which this does not chain yet, so convert them with the NADCON5 tool first; the SPCS2022 beta zones sit on frames not in the chain. WGS 84 is taken as its current realization, G2296. Heights are ellipsoid heights and are not converted to or from orthometric heights. A point far outside the target zone is computed with a warning, and one the zone cannot hold is refused.
Worked example: Colorado Central on NAD 83 (2011) to UTM 13N on WGS 84. Source: add-geodesy-suite composite-path scenario: inverse projection, the frame steps at the epoch, and the forward projection, each with its accuracy.
You enter
- Easting
- 953000 m
- Epoch
- 2026.0
- From
- 6427
- Ellipsoid height
- 1600 m
- Northing
- 515000 m
- To
- 32613
You get
- Coordinates
- 495,731.771 m E, 4,397,345.388 m N
- Easting
- 495,731.771 m
- Northing
- 4,397,345.388 m
- Accuracy
- 0.028 m
- Target system
- WGS 84 / UTM zone 13N
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-19, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-10-09, changed: Coordinate system search and coordinate system transform are now stable: each has a derivation note, an independent worked example from PROJ 9.9 with the EPSG dataset, at least 20 golden vectors, and invariant tests. Changelog
- 2026-10-09, added: New: convert coordinates between two EPSG coordinate systems, such as State Plane on NAD 83 (2011) to UTM on WGS 84. It undoes the source projection, moves the position between frames at the epoch you give, and applies the target projection, listing each step with its accuracy. It follows each EPSG code's own definition, including the feet versions of State Plane zones. Changelog
Checked against: 20 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2 (Guidance Note 7-2), IOGP, Revised September 2019. Concatenated operations: a conversion, a transformation, and a conversion applied in turn.
- EPSG Geodetic Parameter Dataset (EPSG v13.102 CRS registry), IOGP, v13.102, as shipped in PROJ 9.9.0. Coordinate reference system names, units, and areas of use.
Terms
- EPSG: EPSG Geodetic Parameter Dataset
- The IOGP registry of coordinate reference systems and transformations, each with a code such as EPSG:4326. Source: EPSG Geodetic Parameter Dataset
EPSG — EPSG Geodetic Parameter Dataset
The IOGP registry of coordinate reference systems and transformations, each with a code such as EPSG:4326.
Source: EPSG Geodetic Parameter Dataset