Sensor crop factor
The crop factor of a camera sensor from its width and height, with its diagonal and the 35 mm-equivalent of a physical focal length.
Planning and education aid. Not for primary navigation. Full disclaimer
The crop factor is 2.727, for a sensor diagonal of 15.86 mm.
- Sensor diagonal
- 35 mm-equivalent focal length
- Physical focal length
Provenance
- Computed by
- drone.photogrammetry.crop-factor 1.0.0, core 0.1.0
- Model
- Crop factor = 43.267 mm ÷ √(width² + height²), the diagonal of a 36 × 24 mm frame over the sensor's own; 35 mm-equivalent focal length = physical focal length × crop factor
- Accuracy
- Exact for the stated sensor dimensions; nominal sensor sizes such as 1-inch are names, not measurements
- Notes
- None
- Cites
- Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, Elements of Photogrammetry with Applications in GIS; Ruiz, J. J., Diaz-Mas, L., Perez, F., and Viguria, A.; ISPRS Archives, Evaluating the Accuracy of DEM Generation Algorithms from UAV Imagery
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Crop factor = 43.267 mm ÷ √(width² + height²), the diagonal of a 36 × 24 mm frame over the sensor's own; 35 mm-equivalent focal length = physical focal length × crop factor
Accuracy: Exact for the stated sensor dimensions; nominal sensor sizes such as 1-inch are names, not measurements
When to use this: Use this when a camera's specifications give a 35 mm-equivalent focal length and a mapping calculation needs the physical one, or the other way round. Enter the sensor's width and height in millimeters. Add a physical focal length to get its 35 mm equivalent, or an equivalent focal length to get the physical one. The crop factor and the sensor diagonal are always returned.
Limitations: The factor compares diagonals, so it is exact for field of view only when the sensor has the same 3:2 shape as a 35 mm frame; a 4:3 sensor matches on the diagonal and differs slightly in width and height. Use the true sensor dimensions from the maker's specifications, since a nominal size like 1-inch is larger than the sensor it names.
Worked example: A 1-inch sensor with an 8.8 mm lens. Source: Diagonal arithmetic: 43.267 / 15.864 is 2.727, and 8.8 mm is 24.0 mm equivalent. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Physical focal length
- 8.8 mm
- Sensor height
- 8.8 mm
- Sensor width
- 13.2 mm
You get
- Crop factor
- 2.727
- Sensor diagonal
- 15.86 mm
- 35 mm-equivalent focal length
- 24 mm
- Physical focal length
- 8.8 mm
Review: Not yet independently reviewed by a Part 107 remote pilot.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- 35 mm full-frame width used to derive a crop factor
36 mm— Elements of Photogrammetry with Applications in GIS- 35 mm full-frame height used to derive a crop factor
24 mm— Elements of Photogrammetry with Applications in GIS
Sources
- Elements of Photogrammetry with Applications in GIS, Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, 4th edition. Chapter 6 (vertical photographs: scale and ground coverage). Read free.
- Evaluating the Accuracy of DEM Generation Algorithms from UAV Imagery, Ruiz, J. J., Diaz-Mas, L., Perez, F., and Viguria, A.; ISPRS Archives, Volume XL-1/W2. Table 2: typical real-flight mapping parameters, including approximately 1–5 cm GSD. Read free.