Crosshatch survey grid (double grid)
A mapping pattern flown twice over an area, the second pass at right angles to the first, with the lines, photos, path length, and waypoints of both passes.
Planning and education aid. Not for primary navigation. Full disclaimer
Experimental: not yet fully verified. How results are checked
Fly 14 lines for 5.58 km and about 200 photos. That takes about 10.3 min.
| Latitude | Longitude | Kind | Height |
|---|---|---|---|
| 34.9995500 deg | -100.0002453 deg | line_end | 100.0 m |
- Photos
- Path length
- Line length over the area
- Turns
- Flight time
- Line direction
Provenance
- Computed by
- drone.mission.crosshatch 1.0.0, core 0.1.0
- Model
- Two serpentine passes over the area on a local plane, the second with its lines turned 90° from the first, each with lines at the spacing given and photo points along them; the totals are the sums of the two passes
- Accuracy
- Line spacing is true to within 1e-7 across a few kilometers (checked geodesically). Flight time ignores turns, climbs, and wind.
- Notes
- 1 shown with the answer
- Cites
- Abdullah, Q., Penn State College of Earth and Mineral Sciences, GEOG 892: Geospatial Applications of Unmanned Aerial Systems; Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, Elements of Photogrammetry with Applications in GIS; Karney, C. F. F., Journal of Geodesy, Algorithms for geodesics
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Two serpentine passes over the area on a local plane, the second with its lines turned 90° from the first, each with lines at the spacing given and photo points along them; the totals are the sums of the two passes
Accuracy: Line spacing is true to within 1e-7 across a few kilometers (checked geodesically). Flight time ignores turns, climbs, and wind.
When to use this: Use this when one pass of parallel lines will not see enough: buildings, stockpiles, quarry walls, or any site where you want the sides of things in a 3D model. Enter the area, the line spacing, and the photo spacing as for a single grid. The tool lays a second pass at right angles to the first and returns the combined lines, photos, path length, and waypoints, with the flight time when you give a groundspeed.
Limitations: A crosshatch about doubles the flight time and the photo count of a single grid, so check the battery plan. The second pass is exactly perpendicular to the first, over the same boundary and at the same spacing and height. It plans the lines only: gimbal tilt, which a crosshatch for 3D work usually needs, is set on the aircraft. Heights are above the takeoff point unless your flight app follows terrain.
Worked example: A 200 m by 270 m site at 45 m line spacing. Source: add-drone-suite mission patterns: a second pass perpendicular to the first.
You enter
- Area
- 35, -100 35, -99.99704 35.0018, -99.99704 35.0018, -100
- Groundspeed
- 9 m/s
- Height above ground
- 100 m
- Line spacing
- 45 m
- Photo spacing
- 25 m
You get
- Flight lines
- 14
- Photos
- 200
- Path length
- 5.58 km
- Line length over the area
- 3.22 km
- Turns
- 26
- Flight time
- 10.3 min
- Line direction
- 90°
- Height
- 100 m above ground level (constant) at every waypoint
- Mission time
- 619.8 s
- Scene time
- 619.8 s
- Photos captured
- 200
Review: Not yet independently reviewed by a Part 107 remote pilot.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- Default extra photos before and after each flight line
2 photos per end— GEOG 892: Geospatial Applications of Unmanned Aerial Systems
Sources
- GEOG 892: Geospatial Applications of Unmanned Aerial Systems, Abdullah, Q., Penn State College of Earth and Mineral Sciences, online course text, retrieved 2026-09-23. Lesson 4, Designing a Flight Route (number of flight lines; number of images).
- Elements of Photogrammetry with Applications in GIS, Wolf, P. R., Dewitt, B. A., and Wilkinson, B. E., McGraw-Hill, 4th edition. Chapter 18 (flight planning: flight lines, photo spacing, number of photos). Read free.
- Algorithms for geodesics, Karney, C. F. F., Journal of Geodesy, Vol. 87, No. 1. pp. 43-55 (direct and inverse geodesic problems).
Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.