geoprimsField-grade geospatial math

Fuel burn rate

The fuel burn rate a flight actually achieved, from the fuel it used and the time it took, with the endurance that rate leaves on the fuel you have.

Planning and education aid. Not for primary navigation. Full disclaimer

5galUS/h

The flight burned 5 galUS/h.

  • gal was read as US gallons, not imperial gallons.
Provenance
Computed by
aviation.loading.burn-rate 1.1.0, core 0.1.0
Model
Burn rate = fuel used / time; endurance = usable fuel / burn rate
Accuracy
Exact arithmetic. The answer is an average over the whole flight, taxi and climb included.
Notes
1 shown with the answer
Cites
Federal Aviation Administration, Pilot's Handbook of Aeronautical Knowledge, FAA-H-8083-25C

Something look off?

Your values

Showing an example. Change anything.
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Burn rate = fuel used / time; endurance = usable fuel / burn rate

Accuracy: Exact arithmetic. The answer is an average over the whole flight, taxi and climb included.

When to use this: Use this after a flight to learn what your airplane really burns: enter the fuel it took to top off and the Hobbs or tach time, and it returns the average burn rate. Add the usable fuel on board to see how long that rate lets you fly. Compare it with the POH cruise figure, and plan the next trip with whichever is higher.

Limitations: It averages the whole flight, so taxi, run-up, and climb, which burn faster than cruise, raise the figure on short flights. Hobbs time runs from engine start and tach time runs slower at low power, so say which you used. It does not add a reserve; the fuel plan does that.

Worked example: 20 gal over 4 h. Source: FAA-H-8083-25C chapter 16: 5 gal/h for 4 h uses 20 gal. It is golden test vector v007, and every build checks the tool still gives its answer within its tolerance.

You enter

Fuel used
20 gal
Flight time
4 h

You get

Burn rate
5 galUS/h

Review: Not yet independently reviewed by a flight instructor (CFI).

Last verified: 2026-10-20, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.1.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 20 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources