geoprimsField-grade geospatial math

Preflight performance check

Find how much runway the airplane needs today, from the weather and the takeoff table in your POH, before you commit to the departure.

For pilots · 5 steps, worked out together from your values

Planning and education aid. Not for primary navigation. Check every value before you rely on it. Full disclaimer

Your values

Showing an example. Change anything.
More options

All 5 steps worked out from your values.

  1. Step 1

    METAR decoder

    KDEN is VFR with wind 300° true at 15 kt, gusting 25 kt and visibility 10 SM. Get a current official briefing before flight.

    Read the weather: wind, temperature, dew point, and altimeter setting.

  2. Step 2

    Pressure altitude

    Pressure altitude is 5,546 ft. The 1,000 ft per inch rule gives 5,554 ft, off by 8 ft.

    Field elevation and the altimeter setting give pressure altitude, the altitude a POH table is read at.

  3. Step 3

    Density altitude

    Density altitude is 8,623 ft, about 3,200 ft higher than the field. Expect a longer takeoff roll and weaker climb.

    Add the temperature and dew point for density altitude: how high the airplane will feel it is.

  4. Step 4

    Performance table lookup

    The table gives 1,751.022; with the corrections, 1,751.022.

    Read the takeoff table at this pressure altitude in feet and temperature in °C, between its rows and columns, as you would on the chart. The example table is made up for illustration; enter the one from your own POH.

  5. Step 5

    Runway wind components

    10 kt crosswind from the right and 11.1 kt headwind on runway 25, 16.7 kt crosswind in gusts.

    Split the wind on your runway. A headwind shortens the roll and a tailwind lengthens it; apply your POH's wind correction to the distance above.

Assumptions (2)

Values this workflow fixes for you. Open the step's tool to change one.

  • Step 4, Performance table lookup: Variable names = pressure altitude, temperature (change)
  • Step 5, Runway wind components: Wind reference = true (change)