geoprimsField-grade geospatial math

VFR preflight

Check the weather, the altitude your airplane will perform at, and the wind on your runway before you go.

For pilots · 4 steps, worked out together from your values

Planning and education aid. Not for primary navigation. Check every value before you rely on it. Full disclaimer

Your values

Showing an example. Change anything.
Use my aircraft

Loading…

All 4 steps worked out from your values.

  1. Step 1

    METAR decoder

    KDEN is VFR with wind 300° true at 15 kt, gusting 25 kt and visibility 10 SM. Get a current official briefing before flight.

    Read the weather: wind, temperature, dew point, and altimeter setting.

  2. Step 2

    Pressure altitude

    Pressure altitude is 5,546 ft. The 1,000 ft per inch rule gives 5,554 ft, off by 8 ft.

    Field elevation and the METAR's altimeter setting give pressure altitude.

  3. Step 3

    Density altitude

    Density altitude is 8,623 ft, about 3,200 ft higher than the field. Expect a longer takeoff roll and weaker climb.

    Add the temperature and dew point: the altitude the airplane will perform at.

  4. Step 4

    Runway wind components

    10 kt crosswind from the right and 11.1 kt headwind on runway 25, 16.7 kt crosswind in gusts.

    Split the wind on runway 25. A METAR wind is true and runway numbers are magnetic, so the variation is applied.

Assumptions (1)

Values this workflow fixes for you. Open the step's tool to change one.

  • Step 4, Runway wind components: Wind reference = true (change)