geoprimsField-grade geospatial math

IFR approach brief

Brief the hold and the approach: entry, speed limit, wind-corrected headings and timing, and where to start down.

For instrument pilots · 6 steps, worked out together from your values

Planning and education aid. Not for primary navigation. Check every value before you rely on it. Full disclaimer

Your values

Showing an example. Change anything.

All 6 steps worked out from your values.

  1. Step 1

    METAR decoder

    KBJC is IFR with wind 340° true at 12 kt and visibility 3 SM. The ceiling is 800 ft. Get a current official briefing before flight.

    Read the weather at the field.

  2. Step 2

    Maximum holding airspeed

    The maximum holding speed is 230 kt (AIM 5-3-8j, 6,001 ft through 14,000 ft).

    The most you may fly in the hold at 9,000 ft.

  3. Step 3

    Holding pattern entry

    Fly a parallel entry. Cross the fix, turn to parallel the outbound course on the non-holding side (120°) for about 1 minute, then turn left back to the fix.

    Arriving on a 150° heading for a hold with a 300° inbound course, right turns.

  4. Step 4

    True and magnetic bearings

    The converted bearing is 332.4°, using 7.6° E of variation.

    The METAR wind is true; holding courses are magnetic.

  5. Step 5

    Holding wind correction and timing

    Fly 303° inbound and 111° outbound for 51 s.

    Headings and timing that keep the hold's shape in that wind.

  6. Step 6

    Visual descent point

    Start down from the MDA 1.38 NM from the threshold. Descend at about 478 ft/min.

    Where to leave the minimum descent altitude for a 3° path.

Assumptions (4)

Values this workflow fixes for you. Open the step's tool to change one.

  • Step 4, True and magnetic bearings: Direction = true-to-magnetic (change)
  • Step 4, True and magnetic bearings: Latitude = 39.909 (change)
  • Step 4, True and magnetic bearings: Longitude = -105.117 (change)
  • Step 4, True and magnetic bearings: Date = 2026-09-21 (change)