geoprimsField-grade geospatial math

GNSS control to OPUS to state plane

Turn a GNSS position into NAD83(2011) state plane coordinates, an orthometric height, and a ground distance.

For surveyors · 5 steps, worked out together from your values

Your values

Showing an example. Change anything.

All 5 steps worked out from your values.

  1. Step 1

    Transform between NAD 83 and ITRF or WGS 84

    The frames differ here by 1.4406 m horizontally, toward 110.9°.

    OPUS reports ITRF2020 at the observation epoch; bring the point to NAD83(2011).

  2. Step 2

    State plane zone lookup

    Found 2 zones.

    Which state plane zone the point is in.

  3. Step 3

    Latitude and longitude to state plane (SPCS83)

    In Colorado Central (0502) the point is at easting 3,143,344.231 US survey ft, northing 1,694,533.8 US survey ft.

    Northing and easting in Colorado Central (0502), in the zone's legal unit.

  4. Step 4

    Ellipsoidal and orthometric height

    The converted height is 1,607.854 m. The geoid is 16.993 m below the ellipsoid here.

    The ellipsoid height as a height above the geoid (EGM96 here; US work usually uses GEOID18).

  5. Step 5

    Combined scale factor (grid and ground)

    The combined factor is 0.99974828. A ground distance of 1,000 US survey ft is 999.748 US survey ft on the grid.

    Grid scale and elevation factor together: how 1,000 ft on the ground reads on the grid.

Assumptions (3)

Values this workflow fixes for you. Open the step's tool to change one.

  • Step 1, Transform between NAD 83 and ITRF or WGS 84: From frame = ITRF2020 (change)
  • Step 1, Transform between NAD 83 and ITRF or WGS 84: To frame = NAD83(2011) (change)
  • Step 4, Ellipsoidal and orthometric height: Height type = ellipsoidal (change)