m/s to knots
Converts m/s to kt using exact unit definitions.
10 m/s is 19.438445 kt.
- Input
Provenance
- Computed by
- units.speed.mps-to-kt 1.0.0, core 0.1.0
- Model
- Exact unit definitions
- Accuracy
- Exact to double precision: each conversion is one correctly rounded ratio of exact definitions
- Notes
- None
- Cites
- National Institute of Standards and Technology, Guide for the Use of the International System of Units (SI), NIST Special Publication 811; International Civil Aviation Organization, Annex 5 to the Convention on International Civil Aviation: Units of Measurement to be Used in Air and Ground Operations
Something look off?
Common conversions
| m/s | knots |
|---|---|
| 1 m/s | 1.9438445 kt |
| 2 m/s | 3.887689 kt |
| 5 m/s | 9.7192225 kt |
| 8 m/s | 15.550756 kt |
| 10 m/s | 19.438445 kt |
| 12 m/s | 23.326134 kt |
| 15 m/s | 29.157667 kt |
| 20 m/s | 38.87689 kt |
| 25 m/s | 48.596112 kt |
Each row is computed by the same core as the converter above, from the exact unit definitions.
How we got thisFormula, worked example, sources, and proof
Model: Exact unit definitions
Accuracy: Exact to double precision: each conversion is one correctly rounded ratio of exact definitions
When to use this: Use this when a METAR from a country that reports wind in meters per second, a drone spec sheet, or an anemometer reading in m/s needs to become knots. Pilots and controllers think in knots, and crosswind figures in flight manuals are given in knots, so 10 m/s becomes about 19.4 knots before it can be judged against them. Doubling the m/s value gets you close.
Limitations: Each m/s is about 1.944 knots, exact to the unit definitions; the doubling rule is about 3% high. The result is only as good as the reading: an averaged wind hides gusts, and a hand-held anemometer near the ground reads lower than the wind at pattern altitude. Use the runway wind tool to split the converted wind into headwind and crosswind.
Worked example: 10 m/s in kt. Source: Exact unit definitions (NIST SP 811 Appendix B). It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Value
- 10 m/s
You get
- Converted
- 19.438445 kt
- Input
- 10 m/s
Review: Not yet independently reviewed by a metrologist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 3 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Guide for the Use of the International System of Units (SI), NIST Special Publication 811, National Institute of Standards and Technology, 2008 edition. Appendix B.8, Factors for units listed alphabetically.
- Annex 5 to the Convention on International Civil Aviation: Units of Measurement to be Used in Air and Ground Operations, International Civil Aviation Organization, 5th edition. Chapter 3 and Table 3-3. Paid only.