Knots to m/s
Converts kt to m/s using exact unit definitions.
20 kt is 10.288889 m/s.
- Input
Provenance
- Computed by
- units.speed.kt-to-mps 1.0.0, core 0.1.0
- Model
- Exact unit definitions
- Accuracy
- Exact to double precision: each conversion is one correctly rounded ratio of exact definitions
- Notes
- None
- Cites
- National Institute of Standards and Technology, Guide for the Use of the International System of Units (SI), NIST Special Publication 811; International Civil Aviation Organization, Annex 5 to the Convention on International Civil Aviation: Units of Measurement to be Used in Air and Ground Operations
Something look off?
Common conversions
| Knots | m/s |
|---|---|
| 1 kt | 0.51444444 m/s |
| 5 kt | 2.5722222 m/s |
| 10 kt | 5.1444444 m/s |
| 15 kt | 7.7166667 m/s |
| 20 kt | 10.288889 m/s |
| 25 kt | 12.861111 m/s |
| 30 kt | 15.433333 m/s |
| 40 kt | 20.577778 m/s |
| 50 kt | 25.722222 m/s |
Each row is computed by the same core as the converter above, from the exact unit definitions.
How we got thisFormula, worked example, sources, and proof
Model: Exact unit definitions
Accuracy: Exact to double precision: each conversion is one correctly rounded ratio of exact definitions
When to use this: Use this when a forecast or METAR gives wind in knots and your drone, weather model, or engineering formula expects meters per second. Many drone makers publish wind resistance in m/s, and most physics and engineering equations use SI units, so the knot value has to change before it can be compared or plugged in. A quick check: the answer is a little more than half the knots.
Limitations: One knot is exactly 1,852 m per hour, about 0.514 m/s, so the result is exact to the unit definitions. It is still the same measured or forecast wind, with the same uncertainty, and a gust is not the steady wind a drone's rating usually assumes. Wind direction does not change with the unit; this converts the speed only.
Worked example: 20 kt in m/s. Source: Exact unit definitions (NIST SP 811 Appendix B). It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Value
- 20 kt
You get
- Converted
- 10.288889 m/s
- Input
- 20 kt
Review: Not yet independently reviewed by a metrologist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 3 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Guide for the Use of the International System of Units (SI), NIST Special Publication 811, National Institute of Standards and Technology, 2008 edition. Appendix B.8, Factors for units listed alphabetically.
- Annex 5 to the Convention on International Civil Aviation: Units of Measurement to be Used in Air and Ground Operations, International Civil Aviation Organization, 5th edition. Chapter 3 and Table 3-3. Paid only.