geoprimsField-grade geospatial math

Knots to mph

Converts kt to mph using exact unit definitions.

115.07794mph

100 kt is 115.07794 mph.

Input
Provenance
Computed by
units.speed.kt-to-mph 1.0.0, core 0.1.0
Model
Exact unit definitions
Accuracy
Exact to double precision: each conversion is one correctly rounded ratio of exact definitions
Notes
None
Cites
National Institute of Standards and Technology, Guide for the Use of the International System of Units (SI), NIST Special Publication 811; International Civil Aviation Organization, Annex 5 to the Convention on International Civil Aviation: Units of Measurement to be Used in Air and Ground Operations

Something look off?

Your values

Showing an example. Change anything.
Run many at once from a CSV

Loading…

Common conversions

Knotsmph
1 kt1.1507794 mph
5 kt5.7538972 mph
10 kt11.507794 mph
15 kt17.261692 mph
20 kt23.015589 mph
25 kt28.769486 mph
30 kt34.523383 mph
40 kt46.031178 mph
50 kt57.538972 mph
100 kt115.07794 mph
150 kt172.61692 mph
200 kt230.15589 mph
250 kt287.69486 mph

Each row is computed by the same core as the converter above, from the exact unit definitions.

How we got thisFormula, worked example, sources, and proof

Model: Exact unit definitions

Accuracy: Exact to double precision: each conversion is one correctly rounded ratio of exact definitions

When to use this: Use this when a speed in knots has to make sense to someone who thinks in miles per hour: a wind forecast for a ground crew, a boat or aircraft speed for a news story, or a drone wind limit for a pilot used to road speeds. One knot is one nautical mile per hour, so the answer is about 15% larger than the number of knots you start with.

Limitations: The factor is exact, about 1.15078 mph per knot, because both units are defined in meters: the knot as 1,852 m per hour and the mile as 1,609.344 m. That precision belongs to the units, not to your reading. An indicated airspeed is not a ground speed, and a wind forecast is only good to a few knots, so round the answer to match what you measured.

Worked example: 100 kt in mph. Source: Exact unit definitions (NIST SP 811 Appendix B). It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Value
100 kt

You get

Converted
115.07794 mph
Input
100 kt

Review: Not yet independently reviewed by a metrologist.

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 3 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources