geoprimsField-grade geospatial math

hPa to inHg

Converts hPa to inHg using exact unit definitions.

29.921252inHg

1,013.25 hPa is 29.921252 inHg.

Input
Provenance
Computed by
units.pressure.hpa-to-inhg 1.0.0, core 0.1.0
Model
Exact unit definitions
Accuracy
Exact to double precision: each conversion is one correctly rounded ratio of exact definitions
Notes
None
Cites
National Institute of Standards and Technology, Guide for the Use of the International System of Units (SI), NIST Special Publication 811; International Civil Aviation Organization, Annex 5 to the Convention on International Civil Aviation: Units of Measurement to be Used in Air and Ground Operations

Something look off?

Your values

Showing an example. Change anything.
Run many at once from a CSV

Loading…

Common conversions

hPainHg
950 hPa28.053481 inHg
970 hPa28.644081 inHg
980 hPa28.939381 inHg
990 hPa29.23468 inHg
1,000 hPa29.52998 inHg
1,005 hPa29.67763 inHg
1,010 hPa29.82528 inHg
1,013.25 hPa29.921252 inHg
1,015 hPa29.97293 inHg
1,020 hPa30.12058 inHg
1,030 hPa30.41588 inHg
1,040 hPa30.711179 inHg

Each row is computed by the same core as the converter above, from the exact unit definitions.

How we got thisFormula, worked example, sources, and proof

Model: Exact unit definitions

Accuracy: Exact to double precision: each conversion is one correctly rounded ratio of exact definitions

When to use this: Use this when a QNH or altimeter setting is given in hectopascals and your altimeter's setting window reads in inches of mercury, as many US-built altimeters do. Pilots flying outside North America get QNH in hPa from the ATIS, METARs, and controllers, and must set it correctly to read altitude. Standard pressure, 1013.25 hPa, comes out as 29.92 inHg.

Limitations: One inch of mercury is taken as 3,386.389 pascals, the conventional value at 0 °C and standard gravity, so 1 hPa is about 0.02953 inHg. Altimeter settings are read to 0.01 inHg, so round to that. A setting is only valid near the station that issued it and drifts as the weather changes; use the current report, and check the altimeter against field elevation.

Worked example: 1013.25 hPa in inHg. Source: Exact unit definitions (NIST SP 811 Appendix B). It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Value
1013.25 hPa

You get

Converted
29.921252 inHg
Input
1,013.25 hPa

Review: Not yet independently reviewed by a metrologist.

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 3 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources