Kilometers to nautical miles
Converts km to NM using exact unit definitions.
100 km is 53.99568 NM.
- Input
Provenance
- Computed by
- units.length.km-to-nm 1.0.0, core 0.1.0
- Model
- Exact unit definitions
- Accuracy
- Exact to double precision: each conversion is one correctly rounded ratio of exact definitions
- Notes
- None
- Cites
- National Institute of Standards and Technology, Guide for the Use of the International System of Units (SI), NIST Special Publication 811; National Institute of Standards and Technology, Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices, NIST Handbook 44; National Institute of Standards and Technology and National Oceanic and Atmospheric Administration, Deprecation of the United States (U.S.) Survey Foot, 84 FR 60101
Something look off?
Common conversions
| Kilometers | nautical miles |
|---|---|
| 1 km | 0.5399568 NM |
| 5 km | 2.699784 NM |
| 10 km | 5.399568 NM |
| 25 km | 13.49892 NM |
| 50 km | 26.99784 NM |
| 100 km | 53.99568 NM |
| 250 km | 134.9892 NM |
| 500 km | 269.9784 NM |
| 1,000 km | 539.9568 NM |
Each row is computed by the same core as the converter above, from the exact unit definitions.
How we got thisFormula, worked example, sources, and proof
Model: Exact unit definitions
Accuracy: Exact to double precision: each conversion is one correctly rounded ratio of exact definitions
When to use this: Use this when a distance from a map, a road atlas, or a GIS layer in kilometers has to go onto an aeronautical or nautical chart, where distances, visibility rings, and leg lengths are in nautical miles. Fuel and time plans in aviation run on knots and nautical miles, so a 100 km leg becomes about 54 NM before ground speed and endurance can work on it.
Limitations: The nautical mile is exactly 1,852 m, so each kilometer is about 0.54 NM, with no rounding beyond the last digit shown. The distance itself is only as good as how it was measured: a straight line on a map is not the route you fly, and a projected map can stretch distances. For the distance between two coordinates, use the geodesic tools.
Worked example: 100 km in NM. Source: Exact unit definitions (NIST SP 811 Appendix B). It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Value
- 100 km
You get
- Converted
- 53.99568 NM
- Input
- 100 km
Review: Not yet independently reviewed by a metrologist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 3 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Guide for the Use of the International System of Units (SI), NIST Special Publication 811, National Institute of Standards and Technology, 2008 edition. Appendix B.8, Factors for units listed alphabetically.
- Specifications, Tolerances, and Other Technical Requirements for Weighing and Measuring Devices, NIST Handbook 44, National Institute of Standards and Technology, 2026 edition. Appendix C, General Tables of Units of Measurement.
- Deprecation of the United States (U.S.) Survey Foot, 84 FR 60101, National Institute of Standards and Technology and National Oceanic and Atmospheric Administration, Federal Register notice, October 5, 2020 final (85 FR 62698). Effective January 1, 2023.