geoprimsField-grade geospatial math

Elevation factor

The elevation (sea-level) factor that scales a ground distance down to the ellipsoid, from the ellipsoid height or from an elevation and geoid height.

0.99992825

The elevation factor is 0.99992825 at an ellipsoid height of 1,500 ft.

Ellipsoid height used
Provenance
Computed by
survey.reduction.elevation-factor 1.0.0, core 0.1.0
Model
Elevation factor = R/(R + h) with h the ellipsoid height, h = H + N from an orthometric elevation H and geoid height N (Stem 1990)
Accuracy
About 1 ppm with the mean radius; better with a local radius of curvature
Notes
None
Cites
Stem, J. E., National Geodetic Survey, State Plane Coordinate System of 1983, NOAA Manual NOS NGS 5

Something look off?

Your values

Showing an example. Change anything.
More options 3
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Elevation factor = R/(R + h) with h the ellipsoid height, h = H + N from an orthometric elevation H and geoid height N (Stem 1990)

Show your work

  1. Ellipsoid height

    h = H + N, or the ellipsoid height as entered

    457.2 m = 457.2 m

  2. Elevation factor

    EF=R/(R+h)

    6,372,000 m / (6,372,000 m + 457.2 m) = 0.99992825

The same steps an agent gets from the MCP server with explain: true.

Accuracy: About 1 ppm with the mean radius; better with a local radius of curvature

When to use this: Use this to reduce a horizontal ground distance to the ellipsoid, the first half of a grid reduction on State Plane or UTM coordinates. Enter the ellipsoid height of the line, or its elevation with the geoid height, and the tool returns the elevation factor and the height it used. Multiply a ground distance by the factor to get the ellipsoid distance, then by the grid scale factor to reach the grid.

Limitations: The factor uses the mean radius unless you give a local radius of curvature, which is about a part per million either way. Heights must be above the ellipsoid rather than above sea level, so an elevation without a geoid height is flagged. Use the mean height of the line, since one factor for a line with a large height change is an approximation. It does not include the grid scale factor.

Worked example: 1,500 ft above the ellipsoid. Source: NOAA Manual NOS NGS 5 formula with R = 20,906,000 ft. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Ellipsoid height
1500 ft

You get

Elevation factor
0.99992825
Ellipsoid height used
1,500 ft

Review: Not yet independently reviewed by a licensed surveyor.

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

Default mean Earth radius for the elevation factor, as in NGS Manual 5
6372000 m — State Plane Coordinate System of 1983 (NOAA Manual NOS NGS 5)

Sources

Terms

NGS: National Geodetic Survey
The NOAA office that defines the US National Spatial Reference System: datums, geoid models, and state plane coordinates. Source: State Plane Coordinate System of 1983 (NOAA Manual NOS NGS 5)
NOAA: National Oceanic and Atmospheric Administration
The US agency that includes the National Geodetic Survey and the National Weather Service. Source: NOAA Solar Calculator
NOS: National Ocean Service
The part of NOAA that includes the National Geodetic Survey. Source: State Plane Coordinate System of 1983 (NOAA Manual NOS NGS 5)