geoprimsField-grade geospatial math

Angle offset shot

The center of a tree, pole, or column from a distance shot to its side or face and the direction turned to its center.

Experimental: not yet fully verified. How results are checked

1,955.77m

The point is at northing 1,955.77 m, easting 3,044.23 m, 62.55 m from the station on S 45°00'00.0" E.

Easting
Horizontal distance
Azimuth
Bearing
Provenance
Computed by
survey.reduction.angle-offset 1.0.0, core 0.1.0
Model
The center lies at the measured distance plus the radius, along the direction turned to the center: N = N₀ + (d + r)·cos α꜀, E = E₀ + (d + r)·sin α꜀ (Ghilani & Wolf 2021, total-station field practice)
Accuracy
Exact for the geometry; assumes a round object and a distance shot taken at the same distance as its face
Notes
1 shown with the answer
Cites
Ghilani, C. D., and Wolf, P. R., Pearson, Elementary Surveying: An Introduction to Geomatics

Something look off?

Your values

Showing an example. Change anything.
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: The center lies at the measured distance plus the radius, along the direction turned to the center: N = N₀ + (d + r)·cos α꜀, E = E₀ + (d + r)·sin α꜀ (Ghilani & Wolf 2021, total-station field practice)

Accuracy: Exact for the geometry; assumes a round object and a distance shot taken at the same distance as its face

When to use this: Use this to locate the center of a tree, a utility pole, or a round column, where the prism cannot sit. Hold the prism beside the object at the distance of its face, measure the distance, then turn the instrument to the center and read the direction. Enter the station coordinates, the distance, the direction turned to the center, and the object's radius. It returns the center's northing and easting and its bearing and distance from the station.

Limitations: The math is plane geometry on a grid, so the distance must already be horizontal. The object is treated as round, and the shot is assumed to be at the same distance as its near face, so a prism held in front of or behind the face moves the center by that amount. The direction to the prism is recorded but does not move the result. Odd shapes need taped distance offsets instead.

Worked example: The center of a utility pole: 62.40 m to its side, 0.15 m radius. Source: add-survey-suite angle-offset geometry. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Direction to the center
S 45°00'00" E
Direction to the prism
S 45°10'00" E
Horizontal distance
62.4 m
Station easting
3000 m
Station northing
2000 m
Radius
0.15 m

You get

Northing
1,955.77 m
Easting
3,044.23 m
Horizontal distance
62.55 m
Azimuth
135°
Bearing
S 45°00'00.0" E

Review: Not yet independently reviewed by a licensed surveyor.

Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 24 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources

Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.