geoprimsField-grade geospatial math

Curve stationing (PC and PT)

The and stations of a circular curve from the station and any two curve elements, with the tangent and curve length that set them.

59+12.61

The curve begins at PC 59+12.61 and ends at PT 65+12.62.

PT station
Tangent T
Curve length L
Radius R
Deflection Δ
Provenance
Computed by
survey.curves.curve-stationing 1.0.0, core 0.1.0
Model
PC station = PI station − T and PT station = PC station + L, with T = R·tan(Δ/2) and L = R·Δ in radians (Ghilani & Wolf 2021, ch. 24)
Accuracy
Exact for the geometry; stations are rounded to 0.01 ft or 0.001 m
Notes
None
Cites
Ghilani, C. D., and Wolf, P. R., Pearson, Elementary Surveying: An Introduction to Geomatics

Something look off?

Your values

Showing an example. Change anything.
More options 6
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: PC station = PI station − T and PT station = PC station + L, with T = R·tan(Δ/2) and L = R·Δ in radians (Ghilani & Wolf 2021, ch. 24)

Accuracy: Exact for the geometry; stations are rounded to 0.01 ft or 0.001 m

When to use this: Use this to station a horizontal curve once the PI is fixed on the alignment. Enter the PI station and any two curve elements, most often the radius and the deflection angle. The tool returns the station where the curve begins and where it ends, with the tangent and curve length it used, ready for stakeout notes or for stationing the next tangent.

Limitations: Stationing runs along the arc, so the PT station is not the PI station plus the tangent; the difference is the usual station equation at the PI. The curve is one simple circular arc, without spirals or compounding. Stations before 0+00 are written with a minus sign. It does not list stations along the curve; the curve layout tool does that.

Worked example: R 1,432.40 ft, Δ 24°, PI at 62+17.08. Source: Arithmetic on the circular-curve relations: T 304.47 ft, L 600.00 ft. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Deflection Δ
24 deg
PI station
62+17.08
Radius R
1432.4 ft

You get

PC station
59+12.61
PT station
65+12.62
Tangent T
304.466 ft
Curve length L
600.002 ft
Radius R
1,432.4 ft
Deflection Δ
24°

Review: Not yet independently reviewed by a licensed surveyor.

Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 24 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources

Terms

PC: point of curvature
On a horizontal curve, where the curve leaves the back tangent. Source: Elementary Surveying: An Introduction to Geomatics
PI: point of intersection
On a horizontal curve, where the two straight tangents would meet. Source: Elementary Surveying: An Introduction to Geomatics
PT: point of tangency
On a horizontal curve, where the curve joins the forward tangent. Source: Elementary Surveying: An Introduction to Geomatics

PC — point of curvature

On a horizontal curve, where the curve leaves the back tangent.

Source: Elementary Surveying: An Introduction to Geomatics

PI — point of intersection

On a horizontal curve, where the two straight tangents would meet.

Source: Elementary Surveying: An Introduction to Geomatics

PT — point of tangency

On a horizontal curve, where the curve joins the forward tangent.

Source: Elementary Surveying: An Introduction to Geomatics