Survey deflection angle
Finds the left or right deflection from a backsight direction and a foresight direction at an occupied point.
Experimental: not yet fully verified. How results are checked
From the forward tangent, turn right by 50°00'00.00" (50°).
- Deflection angle (DMS)
- Signed deflection
- Turn
- Forward tangent azimuth
- Foresight azimuth
- Direction reference
Provenance
- Computed by
- survey.cogo.deflection-angle 1.0.0, core 0.1.0
- Model
- forward tangent = backsight azimuth + 180°; right deflection = foresight azimuth − forward tangent, wrapped to [0°, 360°)
- Accuracy
- Exact apart from displaying DMS to 0.01 arcsecond and decimal values to eight places
- Notes
- 1 shown with the answer
- Cites
- Ghilani, C. D., and Wolf, P. R., Pearson, Elementary Surveying: An Introduction to Geomatics
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: forward tangent = backsight azimuth + 180°; right deflection = foresight azimuth − forward tangent, wrapped to [0°, 360°)
Accuracy: Exact apart from displaying DMS to 0.01 arcsecond and decimal values to eight places
When to use this: Use this at a traverse, route, or construction point when field notes give the direction from the occupied point back to the preceding point and the direction ahead to the next point. The result tells you the deflection from the forward extension of the incoming line. Choose the shortest turn for ordinary traverse work, or force right or left when a plan, curve, or field procedure specifies the side of the turn.
Limitations: Both directions must use the same north reference. This tool does not apply grid convergence, magnetic declination, meridian convergence, or a basis-of-bearing rotation. A backsight is the direction looking backward from the occupied point, not the travel direction into it; reversing that meaning changes the answer by 180°. A forced right or left turn may exceed 180°, while the shortest convention never does.
Worked example: Right deflection at a traverse point. Source: add-survey-suite deflection-angle operation.
You enter
- Backsight direction
- S 30°00'00" W
- Foresight direction
- N 80°00'00" E
- Direction reference
- grid
- Turn convention
- shortest
You get
- Deflection angle
- 50°
- Deflection angle (DMS)
- 50°00'00.00"
- Signed deflection
- 50°
- Turn
- right
- Forward tangent azimuth
- 30°
- Foresight azimuth
- 80°
- Direction reference
- grid
- Convention
- The smaller angle is measured from the forward extension of the backsight; right is positive and a 180° tie is reported as reverse.
Review: Not yet independently reviewed by a licensed surveyor.
Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 26 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Elementary Surveying: An Introduction to Geomatics, Ghilani, C. D., and Wolf, P. R., Pearson, 16th edition. Chapters 10 (traverse computations), 12 (area), 24 (horizontal curves), 25 (vertical curves), 26 (volumes).
Terms
- DMS: degrees, minutes, seconds
- An angle written as whole degrees, minutes (1/60 degree), and seconds (1/3600 degree), like 40°26'46". Source: ISO 6709 Geographic point location
Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.