Azimuth and bearing converter
Converts a north azimuth, quadrant bearing, or gon value into equivalent azimuth, , bearing, and gon notation.
The assumed direction is azimuth 349.74166667°, or N 10°15'30.00" W.
- North azimuth (DMS)
- Quadrant bearing
- Gons
- Direction reference
Provenance
- Computed by
- survey.cogo.azimuth-bearing 1.0.0, core 0.1.0
- Model
- Quadrant bearings map their acute angle into the matching north-azimuth quadrant; 400 gon = 360°
- Accuracy
- Exact apart from displaying DMS to 0.01 arcsecond and decimal values to eight places
- Notes
- None
- Cites
- Ghilani, C. D., and Wolf, P. R., Pearson, Elementary Surveying: An Introduction to Geomatics
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Quadrant bearings map their acute angle into the matching north-azimuth quadrant; 400 gon = 360°
Accuracy: Exact apart from displaying DMS to 0.01 arcsecond and decimal values to eight places
When to use this: Use this when a plan, deed, traverse sheet, or data collector expresses a direction in a different notation than the next calculation expects. Enter a north azimuth, quadrant bearing, or gon value and the operation writes every equivalent form. Keep the entered reference label so grid, geodetic, or assumed directions do not lose their context while the notation changes.
Limitations: This is a notation conversion, not a rotation between north references. It does not apply convergence, magnetic declination, a basis-of-bearing correction, or a datum transformation. The same numeric direction can mean different lines under different references, so select the reference from the source record. DMS output is rounded to 0.01 arcsecond and decimal outputs to 8 places.
Worked example: Northwest quadrant bearing. Source: Ghilani and Wolf direction notation. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Direction
- N 10°15'30" W
- Direction reference
- assumed
You get
- North azimuth
- 349.74166667°
- North azimuth (DMS)
- 349°44'30.00"
- Quadrant bearing
- N 10°15'30.00" W
- Gons
- 388.60185185 gon
- Direction reference
- assumed
Review: Not yet independently reviewed by a licensed surveyor.
Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-10-14, fixed: Survey tools that read a bearing or azimuth now accept a degree unit written out, like 123.456 deg or 90 degrees. Before, the G at the end of deg was taken for the gon suffix, and the direction was refused as an unreadable number of gons. Directions that were already accepted give the same results. Changelog
Checked against: 27 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Elementary Surveying: An Introduction to Geomatics, Ghilani, C. D., and Wolf, P. R., Pearson, 16th edition. Chapters 10 (traverse computations), 12 (area), 24 (horizontal curves), 25 (vertical curves), 26 (volumes).
Terms
- DMS: degrees, minutes, seconds
- An angle written as whole degrees, minutes (1/60 degree), and seconds (1/3600 degree), like 40°26'46". Source: ISO 6709 Geographic point location
DMS — degrees, minutes, seconds
An angle written as whole degrees, minutes (1/60 degree), and seconds (1/3600 degree), like 40°26'46".
Source: ISO 6709 Geographic point location