geoprimsField-grade geospatial math

Area partition (cut off a required area)

The cutoff line that takes a required area off a parcel: parallel to a side, through a fixed point, or at a given bearing, with both end points, the line's bearing and length, and both areas.

Experimental: not yet fully verified. How results are checked

2,000ft²

Run the cutoff line N 90°00'00" E for 100 ft. It takes off 2,000 ft² and leaves 8,000 ft².

Remaining area
Whole figure
Line bearing
Line length
Start northing
Start easting
Provenance
Computed by
survey.cogo.area-partition 1.0.0, core 0.1.0
Model
Cut area as a function of one unknown: the line's offset (parallel or bearing case), from a half-plane clip of the figure, or the free end's distance along the boundary (fixed-point case), from the coordinate method; solved by Brent's method to 1e-7 of the unit within 200 steps; pieces by the coordinate method (Ghilani & Wolf 2021, ch. 12)
Accuracy
The line is found to 1e-7 of the coordinate unit; the two areas add to the whole within rounding
Notes
1 shown with the answer
Cites
Ghilani, C. D., and Wolf, P. R., Pearson, Elementary Surveying: An Introduction to Geomatics

Something look off?

Your values

Showing an example. Change anything.
More options 2
Run many at once from a CSV

Loading…

1234N ↑Cut 2,000 ft² · line N 90°00'00" E, 100 ft
How we got thisFormula, worked example, sources, and proof

Model: Cut area as a function of one unknown: the line's offset (parallel or bearing case), from a half-plane clip of the figure, or the free end's distance along the boundary (fixed-point case), from the coordinate method; solved by Brent's method to 1e-7 of the unit within 200 steps; pieces by the coordinate method (Ghilani & Wolf 2021, ch. 12)

Show your work

  1. Whole figure

    2A = Σ (xᵢ − x₀)(yᵢ₊₁ − y₀) − (xᵢ₊₁ − x₀)(yᵢ − y₀)

    4 corners by the coordinate method = 10,000 ft²

  2. Line parallel to the side

    find d where the area between side and line = A

    A = 2,000 ft², Brent's method to 1e-7 ft = N 90°00'00" E for 100 ft

  3. Trapezoid check

    (cot⁡α+cot⁡β)/2×d2−L×d+A=0

    the line ends on the two neighbor sides = 0 d² − 100 d + 2,000 = 0, so d = 20 ft

  4. Pieces

    cut+rest=whole

    10,000 ft² − 8,000 ft² left = 2,000 ft²

The same steps an agent gets from the MCP server with explain: true.

Accuracy: The line is found to 1e-7 of the coordinate unit; the two areas add to the whole within rounding

When to use this: Use this to split a parcel by area: to take 2 acres off one end of a tract, to cut a lot with a line parallel to the road, or to run a line from a fixed corner. Enter the corners in order, the area to cut, and the case; it returns where the line meets the boundary, its bearing and length, and both areas.

Limitations: The figure must be a simple closed shape with straight sides; a curve call is refused, so replace it with chords first. The cut must make exactly two pieces, so a line that would cross the boundary more than twice is refused. Coordinates are plane, and a grid area is not a ground area until the combined factor is applied. A legal partition still follows the deed, the statute, and professional judgment.

Worked example: Cut 2,000 ft² off a 100 ft square, parallel to its south side. Source: A 100 ft square: the line runs 20 ft north of the south side.

You enter

Area to cut off
2000 ft2
Cutoff line
parallel
Corners
0, 0 0, 100 100, 100 100, 0
Side
1

You get

Cut area
2,000 ft²
Remaining area
8,000 ft²
Whole figure
10,000 ft²
Line bearing
N 90°00'00" E
Line length
100 ft
Start northing
20 ft
Start easting
0 ft
Start on
side 4, station 0+80.00, offset 0
End northing
20 ft
End easting
100 ft
End on
side 2, station 0+20.00, offset 0
Cut piece
corners 1, 2
Distance from the side
20 ft
Trapezoid check
0 d² − 100 d + 2,000 = 0, so d = 20 ft

Review: Not yet independently reviewed by a licensed surveyor.

Last verified: 2026-09-23, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources

Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.