geoprimsField-grade geospatial math

Under-keel clearance with squat

What is left under the keel from the charted depth, the tide, the draft, a squat estimate by Barrass's formula, and the margin you set, with every term of the stack shown.

Planning and education aid. Not for primary navigation. Full disclaimer

Experimental: not yet fully verified. How results are checked

1.1m

That leaves 2.1 m of water under the keel, 1.1 m more than your margin.

Water under the keel
Clearance after your margin, in feet
Squat
Where she squats
Water depth
Draft with squat
Provenance
Computed by
navigation.vessel.under-keel-clearance 1.0.0, core 0.1.0
Model
Clearance = charted depth + tide − (draft + squat + margin). Squat by Barrass: S_max = K C_B V_K² / 100 with V_K in knots, K = 5.74 S^0.76 for a blockage factor S (K = 1 in open water, K ≈ 2 in a confined channel at S = 0.25), and the other end of the ship at [1 − 40(0.7 − C_B)²] S_max, the bow above C_B 0.7 and the stern below it
Accuracy
The arithmetic of the stack is exact in the units you give. Squat is an estimate from a regression on more than 600 model and ship measurements: published comparisons put Barrass above most other formulas for the same ship, by about a tenth of a meter at 8 knots on a 7,800 tdw cargo ship, so it is the cautious one of the set rather than the closest
Notes
1 shown with the answer
Cites
"Mircea cel Batran" Naval Academy Scientific Bulletin (Constanta), Deleanu and Panaitescu, Comparison between formulas of maximum ship squat; National Geospatial-Intelligence Agency, The American Practical Navigator (Bowditch), NGA Pub. No. 9, Volume I

Something look off?

Your values

Showing an example. Change anything.
More options 4
Run many at once from a CSV

Loading…

WaterChart datumSeabedKeelmargin 1.0 mclear 1.1 mtide 1.5 mdraft with squat 11.4 m (squat 0.6 m)
How we got thisFormula, worked example, sources, and proof

Model: Clearance = charted depth + tide − (draft + squat + margin). Squat by Barrass: S_max = K C_B V_K² / 100 with V_K in knots, K = 5.74 S^0.76 for a blockage factor S (K = 1 in open water, K ≈ 2 in a confined channel at S = 0.25), and the other end of the ship at [1 − 40(0.7 − C_B)²] S_max, the bow above C_B 0.7 and the stern below it

Show your work

  1. Water over the datum

    Charted depth + tide

    12.00 m + 1.50 m = 13.50 m

  2. What the ship draws

    Draft+squat

    10.80 m + 0.60 m = 11.40 m

  3. Clearance after the margin

    Water−(draft+squat)−margin

    13.50 m − 11.40 m − 1.00 m = 1.1 m

The same steps an agent gets from the MCP server with explain: true.

Accuracy: The arithmetic of the stack is exact in the units you give. Squat is an estimate from a regression on more than 600 model and ship measurements: published comparisons put Barrass above most other formulas for the same ship, by about a tenth of a meter at 8 knots on a 7,800 tdw cargo ship, so it is the cautious one of the set rather than the closest

When to use this: Use this when you plan a passage over a bar, a dredged channel, or any shoal patch and want the terms of under-keel clearance written out: the charted depth, the tide you expect at the time, your static draft, a squat estimate for the speed you intend, and the margin you or the port require. Send the tide height over from the tide prediction for the arrival hour. It shows the whole stack rather than one number, so you can see which term to change.

Limitations: Squat is an estimate, not a measurement, and Barrass's formula is published for block coefficients from 0.5 to 0.85 and depth-to-draft ratios from 1.1 to 1.4, with blockage factors from 0.10 to 0.25; outside those the tool refuses rather than extrapolate. It knows nothing of heel, list, trim, sea state, swell, density, or the state of the dredge, and the charted depth is the chart's, not today's. The margin is yours: the master and the port authority decide what is acceptable, and nothing here is a permission to proceed.

Worked example: A 12.0 m channel, 1.5 m of tide, 10.8 m draft, 0.6 m of squat, 1.0 m margin. Source: add-marine-navigation navigation/under-keel-clearance, the Stack scenario: 2.1 m of water under the keel and 1.1 m left after the margin. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Charted depth
12.0 m
Static draft
10.8 m
Your margin
1.0 m
Squat
0.6 m
Tide height
1.5 m

You get

Clearance after your margin
1.1 m
Water under the keel
2.1 m
Clearance after your margin, in feet
3.6 ft
Squat
0.6 m
Where she squats
as you gave it
Water depth
13.5 m
Draft with squat
11.4 m
Depth-to-draft ratio
1.25
The stack
charted depth 12.00 + tide 1.50 − draft 10.80 − squat 0.60 − margin 1.00 = 1.10 (m, your own squat)
Who decides
The master and the port authority decide what clearance is acceptable; this is arithmetic, not permission.

Review: Not yet independently reviewed by a geodesist.

Last verified: 2026-09-19, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 24 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources

Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.