“The sailings” are the old navigator’s toolkit for one question: if I steer this course for this many miles, where do I end up? And the reverse: what course and distance take me from here to there?
There are six of them in Bowditch, and they differ in one thing only: how much of the Earth’s roundness they bother to account for. The trick is knowing when the cheap one is good enough.
Two words first
Every sailing works with two short distances.
- Difference of latitude (l): how far north or south you went, in minutes of latitude. One minute of latitude is one nautical mile.
- Departure (p): how far east or west you went, in nautical miles.
Departure is not the same as the change in longitude. Meridians crowd together toward the poles, so a mile east covers more longitude in Maine than in Panama. Converting departure to difference of longitude (DLo) is where the Earth’s shape gets in.
The six sailings
Plane sailing treats the run as a flat right triangle: the distance is the long side, l and p are the short sides. It is exact for l and p and fine for short runs. Bowditch’s example: 188.0 miles on course 005° gives l = 187.3’ north and p = 16.4 miles east.
Traverse sailing is plane sailing for several legs: add up all the l’s and p’s, then turn the totals into one course and distance made good. Bowditch’s five-leg example nets out at 192.3°, 67.3 miles.
Parallel sailing is for running due east or west. On a parallel, DLo = p ÷ cos(latitude). At 49°30’ N, a DLo of 3°30’ is only 136.4 miles of departure.
Mid-latitude sailing combines the two: plane sailing for l and p, then parallel sailing at the latitude halfway between start and end to get DLo. It is the everyday method for runs of a few hundred miles.
Mercator sailing replaces the middle latitude with meridional parts, the stretched latitude scale of a Mercator chart (Bowditch Volume II, Table 6). It holds up over long distances and high latitudes, where the middle-latitude shortcut drifts.
Great-circle sailing is the shortest path on the globe. The course changes along the way, so it gives an initial course, a final course, and the vertex, the point nearest a pole. Bowditch’s example from 22°S 116°E, off Australia, to 20°S 31°E, off Africa, is 4,693.5 miles, starting on 253°.
Every sailing but the great circle follows a rhumb line, a track of constant course. A rhumb line is easy to steer and always longer than the great circle, except along a meridian or the equator.
How it is worked out
For mid-latitude sailing, the formulas fit in four lines:
- l = D cos C
- p = D sin C
- Lm = (L1 + L2) ÷ 2
- DLo = p ÷ cos Lm
Here D is the distance, C the course, and L1 and L2 the two latitudes. Going the other way, from two positions to a course and distance, run them backward: p = DLo × cos Lm, then C = atan(p ÷ l) and D = √(l² + p²).
A worked example
Bowditch’s mid-latitude example starts at 15°17.0’N 151°37.0’E and runs 1,253 miles on 070°.
- l = 1,253 × cos 70° = 428.6’ north, so the new latitude is 22°25.6’N
- Lm = 18°51.3’N
- p = 1,253 × sin 70° = 1,177.4 miles east
- DLo = 1,177.4 ÷ cos 18°51.3’ = 1,244.2’ east, or 20°44.2’
- Arrival: 22°25.6’N 172°21.2’E
The book prints 172°21.1’E, because it rounds DLo to 1,244.1’ along the way. Hand methods round; the tool does not, and says where the book’s last digit comes from.
On a run that long, the sailings and the true shape of the Earth start to disagree. The mid-latitude and Mercator tools show the exact rhumb line on the WGS 84 ellipsoid beside their answers, and the great-circle tool the ellipsoid’s geodesic, so you can see how much the sphere costs you.
The mid-latitude sailing tool works this example, the plane sailing tool handles short legs, the Mercator sailing tool uses meridional parts, and the great-circle sailing tool finds the shortest route and its vertex.